Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Is it Injectors ???

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 17
Joined: Mon Apr 17, 2006 9:49 am
Location: Nowra

Is it Injectors ???

Post by lostboy »

Hi....I have a problem and I would like to know if anybody here can help me...no not that sort of problem...

I have a 93 V6 SWB Jackaroo, its great, I love it, but it has this annoying sort of hesitation as you power on through the gears (eg from a standing start up to cruising speed), seems to be around the 2500 to 3000 RPM range, :?

As the engine goes through this rev range it seems to hesitate or flutter, its a bit like a flat spot but very slight, just enough to annoy me.
I have changed the plugs, I did a service on it as soon as I could and used good oil and filters, I am starting to think its the injectors but I thought I would see if anybody has any other tips or ideas on how to fix the problem, before I go and spend $750000.00 unnecessarily.

Any help with this problem will be greatly appreciated, even if it does cost me money.....

Thank you
I reject your reality and substitute my own......
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Check your intake air temp sensor. Have seen Rodeo's with the 6vd1 motor develop flatspots and hesitations from faulty IAT sensors.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
DTS
Posts: 11
Joined: Wed Dec 14, 2005 1:53 pm
Location: Alice Springs, NT.

Post by DTS »

Use to have heaps of problems with coolant temp sensors and there conectors on this engine. Would make engine very rich intermitently and would roun rough of flat spot. Some blew puffs of black smoke at the same time. Good luck.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests