Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

American with some 1kz questions

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 5
Joined: Thu Aug 21, 2003 3:06 pm

American with some 1kz questions

Post by Trailrunner »

OK im intersted in maybe doing a 1kz conversion here in the US but need some info. Does any one here have a engine & chassis wiring diagram for a prado with the 1kz & 5 speed transmission? Also what transmissions came with this motor and what is the HP & Tq ratings on it in the prado? Thanks.
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

ill check for you tommorrow on the power rating and the wiring diagram should be available from toyota here, if not it will be in the work shop manual and if that is no good i could sell you a complete wiring harness if that is any use to you.

NICK
TECH SCREW GURU
Posts: 5
Joined: Thu Aug 21, 2003 3:06 pm

Post by Trailrunner »

hey thanks man, a factory manual would be great. you dont happen to have a engine and tranny to go with that harness do ya? :lol:
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Nick prob wont be back on for a couple more days. He usually only gets on Thursday nights and Weekends.

Yes he should also be able to supply an engine and transmision along with anything else you need for the conversion.
Posts: 98
Joined: Tue Apr 15, 2003 1:14 am
Location: Somewhere in Australia.......

Post by Goodsy »

This may interest you. Its a link to download the 1KZ-TE engine workshop manual. 14.5 meg but worth it. Genuine Toyota.


http://surf.mactherapy.com/1KZ-TE.pdf
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

Glad these guys could help you TR!

I am sure there will be more. To my knowledge a Prado with a manual does not exist. At least not as a factory option, so the 5 speed may be difficult. Not interested in the auto??? Ill buy it and the chain drive t-case off the conversion probably. Id say manual conversion woudlnt be too hard!
hands and mums dont count!!!
Posts: 185
Joined: Thu Jul 31, 2003 11:31 am
Location: Brisbane

toyota figures

Post by maty »

there are two engines around one intercooled one not, the only other different this to ECU in the two engines other that that they are the same 1kz-te the intercooled version found in the prado (oz) is 96kW and 343NM the non intercooled but still has a turbo found in hilux (oz) you guys have the tacoma - 85kW and 315NM torque auto available on the prado motor but not the hilux engine. best of luck
MY04 Jeep Wrangler
MY07 SS Ute
Posts: 5
Joined: Thu Aug 21, 2003 3:06 pm

Post by Trailrunner »

Humm well a hilux version would be better cause i can always add a intercooler & do they make chips or any other aftermarket parts for it? Also i was looking on the net and found the 1KD-FTV engine. would it also be a good canidate?

BTW that PDF didnt have the wiring diagrams in it.
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

bj on roids wrote:Glad these guys could help you TR!

I am sure there will be more. To my knowledge a Prado with a manual does not exist. At least not as a factory option, so the 5 speed may be difficult. Not interested in the auto??? Ill buy it and the chain drive t-case off the conversion probably. Id say manual conversion woudlnt be too hard!


we currently have 2 manuals, yes they are hard to come buy but they are out there.

NICK
TECH SCREW GURU
Posts: 185
Joined: Thu Jul 31, 2003 11:31 am
Location: Brisbane

dtronic

Post by maty »

yeah they do an up grade chip here in oz its about 1500$ aus its called dtronic it is fuel management system that can be plugged in and out as desired to restore factory settings. - www.dtronic.com has a site about it made by safari - they make pretty good gear.
MY04 Jeep Wrangler
MY07 SS Ute
Posts: 5
Joined: Thu Aug 21, 2003 3:06 pm

Post by Trailrunner »

humm ok so the 1kz makes 114 hp and 232 ft-lbs of torque non intercooled. Ive heard that it comes with the R151F tranny with the 4.31:1 first gear. is this the same tranny that we have in the states and could i bolt a gear driven case up to it? Also the fuel system, does it use a low pressure pump to get it from the tank to the injection pump? and does it use a electric fuel pedal or a cable to the injection pump? Thanks again.
Posts: 185
Joined: Thu Jul 31, 2003 11:31 am
Location: Brisbane

Post by maty »

as for the transfer case not sure - i know that the landercruiser over here the base model with the naturally aspirated diesel has the same gearbox any help? - not 100% sure but i think that the line from the tank to the injector is low pressure you should double check with the throttle - its still cable on my model (sept 2001) i think that the new ones mid 02 onwards are electronic.
MY04 Jeep Wrangler
MY07 SS Ute
Posts: 98
Joined: Tue Apr 15, 2003 1:14 am
Location: Somewhere in Australia.......

Post by Goodsy »

TRANSMISSION

Transmission code R151F

Transmission type 5 man
Ratio 1 ................4.313:1
Ratio 2 ................2.330:1
Ratio 3 ................1.436:1
Ratio 4 ................1.000:1
Ratio 5 ................0.838:1
Reverse ..............4.220:1
4WD drivetrain description Part-time 4WD
Final drive ratio.... 4.556:1
Final drive location 4WD
Transfer box Dual range
Transfer ratio - high 1.000:1
Transfer ratio - low 2.566:1

Engine
Maximum power 85kW @ 3600rpm (DIN)

Maximum torque 315Nm @ 2000rpm (DIN)
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Trailrunner wrote: Ive heard that it comes with the R151F tranny with the 4.31:1 first gear. is this the same tranny that we have in the states and could i bolt a gear driven case up to it?


TR, the R151F is used on the Toy (Hilux) Turbo 4x4 in the uS. It is mated to a gear driven transfer but the rear output is centered. The input shaft may be different, I don't know. You're looking at the eBay engine? It looks sweet.

Dave
Posts: 52
Joined: Wed Nov 20, 2002 1:39 pm
Location: Sydney

Post by Rexlux »

Goodsy you listed the final drive ratio as 4.556:1. Just wondering where you got this figure from. I have a 2002 hilux brochure that lists it as 3.727:1 for the 1KZ engine with R151F box. I am putting a 1KZ & R151F in an 84 hilux and am still wondering about diff ratios. (obviously not running yet but ready in next few days to try kicking her over).
Posts: 5
Joined: Thu Aug 21, 2003 3:06 pm

Post by Trailrunner »

no ebay engine yet :cry: just want to get all the info i can before i start spending money to make sure its still worth it. so what transfercase does come with the 1kz R151F combo?
Posts: 98
Joined: Tue Apr 15, 2003 1:14 am
Location: Somewhere in Australia.......

Post by Goodsy »

Copied and pasted figures from carpoint. You are right final drive figure is wrong. Didn't think to check them.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests