Weld on Beadlocks

Post by **justinshere** » Thu Jul 06, 2006 11:02 am

Hey

Whats other peolple takes on weld on Beadlocks?

I heard "ROC70Y" (not sure if thats right spelling of it) sells them is this right?

Cheers

Post by **-Mandy-** » Thu Jul 06, 2006 5:03 pm

I have External beadlocks and prefer them over the Second Airs i used to run. They protect and strengthen the rim, protect valves/hubs and look Bling if finished off well

But they are not legal.....so, theres a start.

And last i saw, Chris was selling the rings.

Post by A1 » Thu Jul 06, 2006 5:28 pm

justinshere wrote:Hey

Whats other peolple takes on weld on Beadlocks?

I heard "ROC70Y" (not sure if thats right spelling of it) sells them is this right?

Cheers

New username is Roctoy Designfab i think

Im in the process of drawing some 17" variety up plus brakts for shock mounting ...brkts for linkin out rigs and such

but unsure of price at the moment I do however know that 5mm m/s sheet 1200 x2400 costs about $200 a sheet and the rings I'll be getting made are 6mm(205) so the sheets will be dearer again plus then you have set up fees for the laser then the cost of the laser cutting so the price per each does add up particulary when you are lucky to get a 6 wheel set from 1 sheet

Dan

Post by **Stew77** » Thu Jul 06, 2006 5:31 pm

Chris is doing complete sets of weld on beadlock kits, as well as all sorts of Laser cut goodies. Also can't wait to see his new rock bars he's tinkering with.

Post by **Stew77** » Thu Jul 06, 2006 5:35 pm

New username is Roctoy Designfab i think

[/quote]

Correct

Post by **N*A*M** » Thu Jul 06, 2006 5:56 pm

weld on beadlocks are the only way to go. nothing comes close in terms of price and effectiveness.

Post by **Roctoy** » Thu Jul 06, 2006 7:52 pm

Yep i'm doing them!

I will have a website up and running shortly selling all sorts of goodies in the way of beadlocks, rim protectors, brackets off all kinds.

I will be doing 15" 16" and 17" beadlocks all cut from 6mm mild steel.
As well as this i have a huge array of designs for tube bars, the zook transfer rings, gussets, tabs for mounting all sorts of stuff, shocks etc, Hilux rear disc conversion plates, IFS steering box chassis plates. Custom designed stuff can easily be sorted.

I will have all the pricing up soon, but if you've got something in mind in the meantime pm or email me.

Chris

Post by **TWISTY** » Thu Jul 06, 2006 8:52 pm

Any plans on doing beadlock rings to suit Alloy wheels?

Post by **Roctoy** » Thu Jul 06, 2006 9:21 pm

TWISTY_TOY94 wrote:Any plans on doing beadlock rings to suit Alloy wheels?

i can do alloy inner rings, they are fairly slow to lasercut, i'm looking at router cutting them, should work out better $$$.

Chris

Post by **justinshere** » Thu Jul 06, 2006 11:25 pm

Thanks everyone.
Roctoy any pics i can check out? cheers

Post by **blurredvision** » Sat Jul 08, 2006 8:20 pm

If you are after baedlocks for alooys, try Ian Boetcher's in Ipswich.
Lots of speedway cars use alloy beadlocks.

Post by **MissDrew** » Sat Jul 08, 2006 8:46 pm

Nearly every 4x4 shop makes external beadlocks these days.

There are good and bad ones.

Good ones will have a true seat for the bead to sit in. This bead sholud follow the profile of the tyre`s bead. The 2 rings shouldn`t be just 2 flat plates of steel/alloy.
Plus the inner and outer rings should have a small rib on them that centres the outer ring to the inner ring, this centering should not be done via the bolts alone. What happens here if its all done via the bolts is over time (I`m talking years) the movement will snap bolts, not many bead locks made have this feature as its not that big of a deal as normally when you replace tyres every few years you replace all the bolts at the same time.
The more bolts the better.
The thinker the better.

Now in saying all this I have not had a close look at any of the bead locks around today and can not say who`s are the best or worst at the moment.

I am sort of happy with my beadlocks but they do not have the locating lip I have spoken about above. They also need to have silicon put over the weld on the rim, this is done from the inside and is done before the tyre goes on. If they don`t have the silicon on them then 3 of the 4 leak very badly. The beadlocks I have are the worst I have seen or heard of for this leak if not siliconed.

Post by **chops** » Sat Jul 08, 2006 10:42 pm

what workshops on the northside of brisbane do external bead locks? (for 16x8 rims).. as in drop my rims and tyres off, and come back in a few days and they're all finished and fitted

Post by **not not** » Sat Jul 08, 2006 10:47 pm

None that i ever found chops! Talk to roctoy He will get you sorted

Post by **GQ Bear** » Sun Jul 09, 2006 1:13 am

Guts wrote:
I am sort of happy with my beadlocks but they do not have the locating lip I have spoken about above. They also need to have silicon put over the weld on the rim, this is done from the inside and is done before the tyre goes on. If they don`t have the silicon on them then 3 of the 4 leak very badly. The beadlocks I have are the worst I have seen or heard of for this leak if not siliconed.

Yeah, one of mine was leaking bad when i first got 'em, i bunged some of that steel putty in the crack where it was leaking from. They're all sweet now.

I've folded two rings on rocks/logs too. smashed 'em back with a mash hammer- SWEET !

Post by **MissDrew** » Sun Jul 09, 2006 8:18 am

GQ Bear wrote: I've folded two rings on rocks/logs too. smashed 'em back with a mash hammer- SWEET !

This is the one thing with the bead locks I have that I am over the moon about, this can not happen to mine, they will not bend

Post by **badger** » Sun Jul 09, 2006 12:31 pm

anyone got cad diagrams or measurements for them?

i gunna get me some made up

Post by **Roctoy** » Sun Jul 09, 2006 1:00 pm

Guts wrote:
GQ Bear wrote: I've folded two rings on rocks/logs too. smashed 'em back with a mash hammer- SWEET !
This is the one thing with the bead locks I have that I am over the moon about, this can not happen to mine, they will not bend

why? are they stainless outer rings?
for curiosity sakes Guts, what are your's worth?

Chris

Post by **krimnl** » Sun Jul 09, 2006 1:35 pm

Aus 4wd do an external beedlock rim , i have been using them for a few years now. they are a pressed steel outer ring with a lip to hold the tyre and a steel inner lip. they also put a ring on the inside of the rim to stop damage if required.
they sell spare outer rings aswell incase you smash one on a rock.

Post by **MissDrew** » Sun Jul 09, 2006 6:33 pm

Chris the outer ring is made out of about 20mm cast alloy.

Don`t know price, but it would be lots

Post by **Stew77** » Sun Jul 09, 2006 7:11 pm

badger wrote:anyone got cad diagrams or measurements for them?

i gunna get me some made up

Chris is on the Gold Coast Dude. They are the same as he has on the buggy & he has the design sorted. I would save yourself the headache & talk to him.

Post by **not not** » Sun Jul 09, 2006 7:39 pm

Also chriss rings will soon be on the MOG as soon as granpa garner makes up his rims and gets em done!

Post by **balzackracing** » Sun Jul 09, 2006 8:54 pm

fourbys in brisbane sell external's they can also make the rims too. up too 17's as well i think. not bad price either. i just had 5 of 15x10 rims made with external beadlocks, a piece of 16mm round bar welded on the inside bead (stiffin the wheel and help prevend dents and damage) made with 10mm centers insted of six and set for 1 5/8" back space for my cruiser for under $450 a wheel powercoated.

Post by **balzackracing** » Sun Jul 09, 2006 8:55 pm

fourbys in brisbane sell external's they can also make the rims too. up too 17's as well i think. not bad price either. i just had 5 of 15x10 rims made with external beadlocks, a piece of 16mm round bar welded on the inside bead (stiffin the wheel and help prevend dents and damage) made with 10mm centers insted of six and set for 1 5/8" back space for my cruiser for under $450 a wheel powercoated.

Post by **spazbot** » Sun Jul 09, 2006 10:40 pm

badger wrote:anyone got cad diagrams or measurements for them?

i gunna get me some made up

you got a tape measure dont ya, you can take ur own measurements and make ur own up, not that hard.

Post by **GQ Bear** » Mon Jul 10, 2006 11:45 am

Roctoy Designfab wrote:
Guts wrote:
GQ Bear wrote: I've folded two rings on rocks/logs too. smashed 'em back with a mash hammer- SWEET !
This is the one thing with the bead locks I have that I am over the moon about, this can not happen to mine, they will not bend
why? are they stainless outer rings?
for curiosity sakes Guts, what are your's worth?

Chris

Mate, i had one got peeled back when a log that been used for someone's road-building use flicked straight into ring with 4by at full noise and locker engaged. This one had to be removed and panel-beaten straight.

The other was roaring up a loose, shaley rock hill and i only noticed it when i stopped. Air was leaking. Coupla taps with the persuada and it was all sweet.

No they're not stainless, 4mm steel profiled to fit bead. In those two instances i'm glad the ring was there otherwise the rim would've been f**ked and probably the tyre too (and that would make me cry

)

Post by **Roctoy** » Mon Jul 10, 2006 9:21 pm

here are the beadlocks i'm doing.
They are nothing fancy, just 2 x 6mm mild steel plates laser cut. My beadlocks will come with a centering, anti-coning ring (a strip of flat bar that is to be welded to the inner ring and stops the outer ring coning inwards as the bolts are tensioned.

Remember though, external beadlocks are illegal for street use and should be for off road use only.

I will soon have pricing for 15, 16 & 17" steel wheels.
Aluminium rings will be sorted shortly and for the ultimate in strength and bling, stainless steel outer rings will also be available, at a cost.

Here's some pics of the ones that are on my buggy and soon to be on the Mogrover.

Cheers Chris

Post by **not not** » Mon Jul 10, 2006 9:28 pm

Ohhhh you even made an attempt to paint ya tires all shiny like chris

Post by **Roctoy** » Mon Jul 10, 2006 9:29 pm

not not wrote:Ohhhh you even made an attempt to paint ya tires all shiny like chris

that was before the last round of we rock and it just made the dust from the driveway stick to the tyres better, secret traction compound.

Post by **not not** » Mon Jul 10, 2006 9:38 pm

I spose you need all the help ya can get with the maxxis double

back at ya!

Outer Limits 4x4 Board

Weld on Beadlocks

Weld on Beadlocks

Re: Weld on Beadlocks

Re: Weld on Beadlocks

Beadlocks

Who is online