Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

200TDi Dash

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 47
Joined: Thu Mar 23, 2006 10:18 am
Location: Warragul

200TDi Dash

Post by mike_beecham »

I have a stuffed dash - cracked etc - and have access to a TD5 Defender dash (not the instrument panel) can l fit it to my 200 TDi? Including the centre "pod" that the radio, elec weindow buttons etc, are mounted on???

I know the loeve system is different - is this changeable also (the TD5 system is better anyway).

Or is all going ot be a Rover nightmare to do and l shoudl just source a TDi dash?????


Mike
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Anything can be made to fit, I have seen VN Commodore dashes in rangies. It just depends on how much stuffing around you are willing to do and if you can do it yourself.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 47
Joined: Thu Mar 23, 2006 10:18 am
Location: Warragul

Post by mike_beecham »

Cheers on that mate - yeah - used to having to stuff around. Can do myself.

Thanks
_______________________________________
2006 Defender TD5
No oil leaks
Top
Posts: 86
Joined: Thu Jul 15, 2004 1:54 am
Location: Brisbane QLD

Contact:
Contact aliread

Post by aliread »

can be done easy i did it to a 200 tdi 90 as you can see by the pic. i put it in because i wanted more places for stwiches

Image
AKA Reads90

Its the way it shatters that matters
Top
Posts: 207
Joined: Tue Oct 05, 2004 7:52 pm
Location: Italy

Contact:
Contact Michele

Post by Michele »

What about this
Image

made in Germany (not behind the corner though)

http://www.ex-tec.de/shop/products.php? ... 3898e615c1
M
D90 Tdi The Cube II ©
www.whitedogrover.com
Top
Posts: 47
Joined: Thu Mar 23, 2006 10:18 am
Location: Warragul

Post by mike_beecham »

Yeah - other reason being more switches. Currently they are placed in awkward locations. Did you just put the centre facisa in - or the whole dash door-to-door?


Mike
_______________________________________
2006 Defender TD5
No oil leaks
Top
Posts: 86
Joined: Thu Jul 15, 2004 1:54 am
Location: Brisbane QLD

Contact:
Contact aliread

Post by aliread »

mike_beecham wrote:Yeah - other reason being more switches. Currently they are placed in awkward locations. Did you just put the centre facisa in - or the whole dash door-to-door?


Mike
i put in the center and the new back/vent bit. Kept the top of dash and bottom of the old dash.
easy to do
AKA Reads90

Its the way it shatters that matters
Top
Posts: 47
Joined: Thu Mar 23, 2006 10:18 am
Location: Warragul

Post by mike_beecham »

So you can just fit the pod without replacing the entire dash. They want $500 for the complete dash! Pod is $150.

How much cutting is invloved!?


Mike
_______________________________________
2006 Defender TD5
No oil leaks
Top
Posts: 86
Joined: Thu Jul 15, 2004 1:54 am
Location: Brisbane QLD

Contact:
Contact aliread

Post by aliread »

mike_beecham wrote:So you can just fit the pod without replacing the entire dash. They want $500 for the complete dash! Pod is $150.

How much cutting is invloved!?


Mike
you have to cut the bottom part of the dash (where the clock and rear wash wipe sit.) Just have to take off the top of the raised bit in the middle. .
AKA Reads90

Its the way it shatters that matters
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 4 guests