Final got around to hooking up the handbrake to the rear discs.
Fan bloody tastic.
Why didn't I do this yonks ago.
Works great, always works, and still works after a trip.
Tis strange, tho, as it don't rock back n forward anymore, on the driveline slack.
Drum on the tailshaft in theory is a great idea. But It never lasted more than 5 minutes, and shoes were gone again.
The rear discs chew pads a little quick, but still cheaper and longer lasting than drum brakes are to maintain.
I used all the cables and lever mechanism and clips from the Pintara the discs came off.
christover
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Decent Hand Brake on a Sierra Strewth
Decent Hand Brake on a Sierra Strewth
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
I haven't had any probs. Mines a 1.0 litre, hence no power booster. I don't know if that makes a difference.Eff wrote:Nice work christover1
Feel free to convert my rear's to disc and hooking up the handbrake too em
Ive been told rear discs can be really twitchy on sierra's (rear end slides out a lot), have you had any issues?
Eff
But with any changes, learning the car's new handling is important.
There is a small spring valve thingy that holds slight fluid pressure on the rear wheels, needed for drums to function, in the master cylinder.
This can be removed to help rear discs work better.
You can also use brake bias in the line, which some zooks already have.
Some people use different pads front and rear, or different sized discs to help bias.
Most of the hard work was done by a mate (sr20 zook owner)
I'm sure he'd make some more conversion plates, but its a lot of work, and not cheap.
Rather good tho, especially after mud, as brakes still work

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
It's a zook, we never back downDamo wrote:Another great advantage is that you've actually got decent brakes if you have to back down a hill!

yes, your right, its very nice.
I get another tailshaft Wednesday,


4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Who is online
Users browsing this forum: No registered users and 2 guests