Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
HELP - Wide Track kit on a Hilux
Moderators: toaddog, Elmo, DUDELUX
HELP - Wide Track kit on a Hilux
Hi Guys,
Putting my IFS rear housing on this weekend and just wondering should i replace the O-ring seal aroung where each axle bolts up to the housing
There also looks like there was either silcone or a seal aroung where the diff bolts on Anyone know If so i will need to get these before the weekend
Anything else i need to know
Yes i got the handbrake cable with the new housing
Putting my IFS rear housing on this weekend and just wondering should i replace the O-ring seal aroung where each axle bolts up to the housing
There also looks like there was either silcone or a seal aroung where the diff bolts on Anyone know If so i will need to get these before the weekend
Anything else i need to know
Yes i got the handbrake cable with the new housing
Kind Regards,
Brad
Brad
Re: HELP - Wide Track kit on a Hilux
1. If it has any sign of damage, splits, flat sections etc, but these rarely ever break.LuxyBoy wrote:Hi Guys,
Putting my IFS rear housing on this weekend and just wondering should i replace the O-ring seal aroung where each axle bolts up to the housing
There also looks like there was either silcone or a seal aroung where the diff bolts on Anyone know If so i will need to get these before the weekend
Anything else i need to know
Yes i got the handbrake cable with the new housing
2. Use the correct gasket and some RTV sealant for this flange, not silicone.
3. You will need the later model drums, you cant use your old narrow-track ones.
\m/
cheers
ROLFStruth wrote:Just ask for it at Rip Every Poor C--t Off or Bursons.
cheers.
Thanks guys
I got the whole thing drum to drum and handbrake cable just no centre as mine will be used.
I will have to get some of the Ultra Blue tomorrow
Kind Regards,
Brad
Brad
Twisted by Design
manufacturing
http://www.sky-manufacturing.com/Tomolux wrote:on this tpoic. who makes the spacers for fitting the ifs hubs on the front now that ORI is capput
Cheapest; cheaper than anything Australia shipped to your door
Kind Regards,
Brad
Brad
Who is online
Users browsing this forum: No registered users and 0 guests