Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What Shocks are needed for me?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

What Shocks are needed for me?

Post by Mulisha »

Hi guys

While i was on the beach both my back shocks (Stock) started leaking oil so it's time to buy some new ones not bad for 18 years

I have a question this car does 99% of the time on the road so road use would be a must. I tow a boat a pretty often so i was think along the lines of Air Shocks so i can pump them up kinda hard to make the car corner better and feel more stable not as swaying.
Could someone maybe suggest a shock for my needs as i tow a boat but not all the time. so mainly what i need is a good stable shock that will corner nicely but won't cost a arm and a leg.

I have priced a few shocks just not sure which ones to go with.
Monroe Gas Magnum TDT (2 Shocks for $254)
Gabriel "Ultra Shock ($90 ea)
Gabriel Blue Ryder ($99.50 ea)

Should i replace all 4 at the same time or just the back 2 as there the worst out of them all.

Cheers Guys. :D
Posts: 317
Joined: Fri Nov 18, 2005 9:32 pm

Post by ats4x4dotcom »

Bilstein only way to go, velocity controlled valving, great control, consistant loaded, unloaded, fast, or slow.

Replace all 4, or the well controlled end will transfer making the other end feel worse.
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

cheers i see what other suggest :D :D :D :D

Thanks again Rick.
Posts: 192
Joined: Tue Dec 20, 2005 1:37 pm
Location: Brisbane

Post by spannercrab »

1. Bilsteins

2. Koni's

Both great shocks ... the price of the Bilsteins may frighten you though :)
If it's worth doing - it's worth doing to excess ...
Posts: 4792
Joined: Sun Nov 21, 2004 9:05 pm
Location: Watching out for stray buses

Post by Brendan-s »

a little off the mark, but the konis in the front of my MQ are awesome -- i swear by them.
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

bilstien, go specials on them at the moment, email if you would like a quote.

Adam
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

Tiny roughly how much are they ea i'm not looking to spend a fourtune :lol:

One other thing i was speaking to some guy at work and he said that he would put EFS in his 4wd are these any good and he said he paid $90ea :cool:

Cheers.!

Rick.
Posts: 317
Joined: Fri Nov 18, 2005 9:32 pm

Post by ats4x4dotcom »

Mulisha wrote:Tiny roughly how much are they ea i'm not looking to spend a fourtune :lol:

One other thing i was speaking to some guy at work and he said that he would put EFS in his 4wd are these any good and he said he paid $90ea :cool:

Cheers.!

Rick.
EFS are another KOFAP shock, which arent really worth the low price.

Bilsteins, with the good buhes, and the correct valving [dont use Bilstein part no] should only cost you around $649 for 4 to suit, with stone shields for the rear included, and freight to the door TNT is under $25.

If your looking for budget, Ridepro do some great valving, and are under $500 a set.
Posts: 236
Joined: Thu Apr 27, 2006 9:40 pm
Location: Gippsland, Vic

Post by currentlyoffline »

ats4x4dotcom wrote: Bilsteins, with the good buhes, and the correct valving [dont use Bilstein part no] should only cost you around $649 for 4 to suit, with stone shields for the rear included, and freight to the door TNT is under $25.

If your looking for budget, Ridepro do some great valving, and are under $500 a set.
Would you recommend these over Koni Raids on a heavy Tourer with a three inch lift ie. - 05 GU 4.2 3.0 tonnes with all the junk ?
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

Dobinsons shocks are valved a bit firmer than your EFS/TJM, Procomp shocks and they will put up with the punishment as good as Bilstein or Koni IMHO. I can sell them to you for $95 each. $10 for freight whether for 1 shock or 4.

Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 16
Joined: Wed Jan 26, 2005 12:05 pm
Location: Brookvale

Post by 38zook »

Entry level Tough Dog Foam Cell Shocks, good valve rates, compression and rebound, stone guard. Good product for the price.

$160-00 each 2yr/40000km warranty.
V6 Zook, 37 Irok's, GQ Diffs, Coils, Work in progress.

Mitchell Bros 4x4 & More
16 Chard Rd
Brookvale
NSW 2100

PH: 02 9905 4764

www.mitchellbros.com.au
Posts: 16
Joined: Wed Jan 26, 2005 12:05 pm
Location: Brookvale

Post by 38zook »

Entry level Tough Dog Foam Cell Shocks, good valve rates, compression and rebound, stone guard. Good product for the price.

$160-00 each 2yr/40000km warranty.
V6 Zook, 37 Irok's, GQ Diffs, Coils, Work in progress.

Mitchell Bros 4x4 & More
16 Chard Rd
Brookvale
NSW 2100

PH: 02 9905 4764

www.mitchellbros.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest