Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HELP!!!! 80 series centres into hilux diff housings?????

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Contact:
Contact Roctoy

HELP!!!! 80 series centres into hilux diff housings?????

Post by Roctoy »

i know you can bolt an 80 series high pinion into a hilux housing but my dilemma is a little different.

I recently bought a 2nd hand detroit true track from a guy who was going to put it in his hilux but never got around to it... :roll:

I have completely stripped my buggy to pieces swapping diff centres and stuff (puting existing air locker in the rear and the detroit in the front)

Tonight i pulled the hilux diff centre appart and took the crownwheel off and bolted it to the detroit, ready to put back in the carrier. Only to find the bearings wouldn't fit.

Image

I'm assuming now, that it was orignally in a 80 series diff centre and not a hilux one.
Is there any thing i can do with the bearings etc or do i have to find an 80 series high pinion centre and bolt it all in that? Can i still use the 4.88 gears from the lux centre? or is this thing all a waste of time and i should part out the buggy? :shock:

Chris
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Top
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Contact:
Contact Roctoy

Post by Roctoy »

This thread says i should just be able to get bigger bearings, that's cool but will they fit into the hilux carrier?

http://www.outerlimits4x4.com/PHP_Modul ... suspension

i.e. Do the "bigger" bearings just have a bigger internal diameter?

Chris
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

You will be able to get a bearing that is bigger but willl still fit into the hilux centre. This is quite common with hilux junk. :D
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Contact:
Contact Roctoy

Post by Roctoy »

problem solved till the next thing then i guess...

just go and get some 80 series side bearings.

Cheers Sam
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Roctoy Designfab wrote:problem solved till the next thing then i guess...

just go and get some 80 series side bearings.

Cheers Sam
No you need a different bearing to the 80. You need a bearing with the early hilux outer diameter and the late hilux inner diameter. It is available as you can only buy a late hilux airlocker now(RD23) and they use this bearing to install them in early ones.

What you have is a True Track to suit either a late hilux or an 80series. Your 4.88 gears wont fit an 80series front centre.
Top
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Contact:
Contact Roctoy

Post by Roctoy »

got the bearings sorted today

the part number is B32010 JA1

CBC Bearings do them for $85.10 pair incl GST :shock:

CRF Bearings at Southport sell them for $74.25 pair incl GST :?

Oh well need em.

Chris
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

i payed 52 from a bearing shop at morayfeld
Top
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Contact:
Contact Roctoy

Post by Roctoy »

do these have to be pressed on by hydraulic means or can you just use a little gentle persuasion with a hammer and a lump of wood?

Chris
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests