Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Vitara 2.0 V6 swap to a 2.5?????

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 3
Joined: Mon Jun 19, 2006 9:11 pm
Location: Merrylands

Vitara 2.0 V6 swap to a 2.5?????

Post by lounbern »

OK,
What can I do? I need to swap my nearly dead 2.0 V6 Vitara engine. See this thread as I understand it is a bolt out and bolt in process that is quite easily done http://www.outerlimits4x4.com/PHP_Modul ... hp?t=78412
BUT, the more questions I ask around, the more puzzled I get! I am being told by the suzi wrekers guy at Dunhevened (sp) (near St Marys in Sydney) that this is the best option as the 2.0 V6 is under powered, over fueld etc etc...
I have also been told here that I have to use the fuel rail and throttle body with the 2.5.try to install the idle adjuster of the 2.0 litre if you can. I have also been told that ANYTHING that goes back to the engine management system has to be swaped from the 2.0 over to the 2.5!
On the otherhand, I have been told by many mechanics (called to see if they can do the convert...) that it can NOT be done, maybe they just dont want the job :armsup: .
So, I am throwing out to everyone here, what am I to do??
Any or all ideas greatly accepted as I am fed up with not having a car and having to catch a train from Western Sydney into the city every day!!! :lol:
Suzi's I've owned: Sierra 1.0; Vitara V6
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 292
Joined: Mon Jan 20, 2003 5:43 pm
Location: Liverpool NSW

Post by Charlie »

You might try BBM Motorsport,I don't think they would do it themselves but I'm sure they could stear you in the right direction.
Posts: 2
Joined: Thu Jun 15, 2006 9:29 pm

Post by brkram »

i currently own a 97 2.0v6 and just currently rebuilt the engine and it cost me the best part of $3500 as most parts had to be genuine suzuki .

my brother inlaw owns a 98 grand vitara 2.5 engine is identical to the 2.0 v6 i would do the 2.5 convertion get a front cut from imports or wrecked car as you will need to change the computer and wiring .

only thing i could suggest is to find a mechanic to change engine over and the sparky to wire up any different sensors and computer
Posts: 3
Joined: Mon Jun 19, 2006 9:11 pm
Location: Merrylands

Post by lounbern »

Where abouts did you get your engine done at $3500?? Best I have had done is $8995 :bad-words: :bad-words: :bad-words: !!
brkram wrote:i currently own a 97 2.0v6 and just currently rebuilt the engine and it cost me the best part of $3500 as most parts had to be genuine suzuki .

my brother inlaw owns a 98 grand vitara 2.5 engine is identical to the 2.0 v6 i would do the 2.5 convertion get a front cut from imports or wrecked car as you will need to change the computer and wiring .

only thing i could suggest is to find a mechanic to change engine over and the sparky to wire up any different sensors and computer
Suzi's I've owned: Sierra 1.0; Vitara V6
Posts: 2
Joined: Thu Jun 15, 2006 9:29 pm

Post by brkram »

Hi Lounbern


i did it myself used all genine suzuki parts and got the heads done up

but it helps that i work on cars for a living
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests