Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Anyone.....

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 380
Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane

Anyone.....

Post by Cruzer! »

Running a SC12 Supercharger off a 4AGZE on a G13B? or no of anyone that is/has done so? just trying to figure out best position to mount the charger, where i originally planned looks like it wont work :x
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Top
Posts: 264
Joined: Tue Aug 31, 2004 4:57 pm
Location: New Zealand

Contact:
Contact Rotazuk

Post by Rotazuk »

NOt running one yet , give me a week or so . I have a sc12 and an amr300 supercharger here and the sc12 looks like it will be a mission to fit , going to be very wide . If you have the 1.3 one of those amr300s would bolt on a lot easier and should have heeps of huff for it . I will keep an eye out and see how it goes .

Chris
Top
Posts: 380
Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane

Post by Cruzer! »

cheers mate, i reckon i could fit it just might need a bit more modification :) just wondering if anyone else had fit it
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Top
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

well i was going to fit a sc12 on my jimny efi g13bb, but rolled it before i could start.

i rekon it would be great running around 5psi.
keep us updated!
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Top
Posts: 380
Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane

Post by Cruzer! »

yeah, my plans are running it on a G13B TBI motor, standard MAP sensor hopefully, pulling the throttle blade out of the tbi unit, and running it as Air Filter/Divorced Throttle Body(With TPS)/Charge Pipe (with Blow Of Valve set to around 7-8 PSI to bleed excess boost past supercharger)/Supercharger/Charge pipe to Top Mount/Top mount to Throtle body Injection Unit.

Just gotta mount it now :) A few more wiring issues and then ill get onto it, might be next week now coz still got to sort out cooling system woes.... Basically idea is putting the Super charger where the alternator is, moving alternator to left hand lower side of block near oil filter where it can run of the same belt as my skyline PS pump :)
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Top
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

Pics?
Top
Posts: 380
Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane

Post by Cruzer! »

i dont think the sc12 will fit, been playing with it all day... reckon i might put it up for sale or hold on to it for a bit, and try and find a amr300 or amr500.... I moved my alternator to the left side of engine bay, and while i was at it put in a 90 A alternator from my old suby wagon (on a 1l alternator braket, bolts on and slides in sweet.)... and it fits perfectly under my ps pump... so measured up the spot where the alternator was and reckon i could fit an amr in it... so looks like thats the way i will go.
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest