Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

will a say ford or holden V8 fit my zook....?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 56
Joined: Mon May 22, 2006 6:14 pm
Location: Bentleigh, Melb

will a say ford or holden V8 fit my zook....?

Post by pietro_vs_zook »

i was thinking a commodore v6 or s13 turbo nissan but now i am thinking say 253 ......i want more overall power..!!!!!!!!!!.

thanks on any input.....can i use my standard 90 swb vit running gear....?
Posts: 616
Joined: Tue Mar 29, 2005 6:56 pm
Location: Gympie

Post by Zookified »

You can just about fit any engine in you want mate. Just have to be prepared to do some firewall mods, bonnet mods etc. In most cases it will jsut be the $$$ issues that hold back conversions, not the cutting etc involved.
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

cubic inches will get you power. Unfortunately you still want to be able to drive it, so stay away from heavy motors.

So this means you are now looking at an Alloy V8. You can buy alloy blocks from the states for 302's up to 427 cobrajets.

But I hope you are a sucsessful drug smuggler.........cos if you ain't you'll find it hard to pay for this puppy.
[url]www.twinstickoffroad.com[/url]
Posts: 56
Joined: Mon May 22, 2006 6:14 pm
Location: Bentleigh, Melb

Post by pietro_vs_zook »

my best bet will be to turbo charge it........ can you turbo charge a vit carby or do you need a fuel injected.... i am stupid so dont laugh.......
Posts: 180
Joined: Fri Jun 16, 2006 11:48 pm
Location: Brisbane

Post by joshnz1 »

we can tell,if u want to go fast why buy a 4wd?buy a drag car.u can turbo a carby engine but its better to turbo a efi engine
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

I seriously think you would be better of buying a cheap v8 car of some description and keep the vitara as a play thing. you will spend less money and have a better outcome.
[url]http://www.vic.suzuki4wd.com/forum[/url]
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Rover 3.5 V8 auto with Toyo 80 series running gear???? Takes care of driveline offset too...
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

DAMKIA wrote:Rover 3.5 V8 auto with Toyo 80 series running gear???? Takes care of driveline offset too...
Sam Keck's old vit ran rova v8 and auto, so it can be done. How much work would be a different story. 253, dont even bother, unless you want a boat anchor. Though in reality, how much power do you want, and what do you want it for. It is a vitara remember, not a skyline, and unless you throw a bank load at it its not going to go or handle or STOP like a sports car ever.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 231
Joined: Mon Dec 20, 2004 9:43 am
Location: lost in my pile of parts

Post by Tim D »

I like to think, the faster you make the engine go the shorter the life of the engine.
If you want to race it like a race car, you need to maintain it like a race car. ;)
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Does anyone know the power output of a 253 anyway, probably only around 150 -180kw. For the extra weight that you're adding and how that will effect the balance of the car it's not worth the dramas. You'd be better off with a Nissan 200sx engine.
Posts: 374
Joined: Mon Apr 24, 2006 12:10 pm
Location: Tamworth, NSW, Australia

Post by Aerenandmel »

253 4.2 Litre LC V8 Engine:
Capacity: 253 cubic inches (4.146 litres)
Type: Conventional, watercooled four stroke, reciprocating piston type with 8 cylinders
Configuration: Front mounted, longitudinal, Vee configuration
Head: Pushrod and rocker actuated ohv with two valves per cylinder
Fuel System: Twin barrel Bendix-Stromberg carburettor
Bore and Stroke: 3.625 x 3.062 inches (92.1 x 77.8mm)
Power: 174bhp (130kw) at 4400rpm
Torque: 247lb-ft (335Nm) at 2400rpm
Compression Ratio: 8.0:1

253 V8 Engine:
Capacity: 253 cubic inches (4.146 litres)
Type: Conventional, watercooled four stroke, reciprocating piston type with 8 cylinders
Configuration: Front mounted, longitudinal, Vee configuration
Head: Pushrod and rocker actuated ohv with two valves per cylinder
Fuel System: Twin barrel Bendix-Stromberg carburettor
Bore and Stroke: 3.625 x 3.062 inches (92.1 x 77.8mm)
Power: 185bhp (138kw) at 4400rpm
Torque: 262lb-ft (355Nm) at 2400rpm
Compression Ratio: 9.0:1
Posts: 180
Joined: Fri Jun 16, 2006 11:48 pm
Location: Brisbane

Post by joshnz1 »

138kw is nothing for a big old heavy POS engine if u put a sr20det or a ca18det you could get that plus heaps more easy and still have a light car and alot more fun to drive
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

if you say you are stupid and dont know much, why on earth are you even considering a engine conversion, there is much much work involved and without alot of knowledge its going to look like someone shat in your engine bay..
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Posts: 93
Joined: Wed May 31, 2006 11:26 pm
Location: craigs house

Post by Swamp Donkey »

lexus v8, all alloy, quad overhead cam, 6 bolt mains factory :shock: ,260 ponnys= cheap from the import wreckers a lot fun in a zook :twisted:
munch, munch, jeep for lunch.
Posts: 56
Joined: Mon May 22, 2006 6:14 pm
Location: Bentleigh, Melb

Post by pietro_vs_zook »

my brother a macanic so i dont need to no anything.. i am a simple of chippy!!!!!!!

let him have the head fu#k

so you this a 200 sx engine...... mmm i like....! thanks for all imput!!!!!!


cheers
peter
Posts: 56
Joined: Mon Aug 23, 2004 12:47 pm
Location: Auckland, NZ

Post by Fourdogs »

Swamp Donkey wrote:lexus v8, all alloy, quad overhead cam, 6 bolt mains factory :shock: ,260 ponnys= cheap from the import wreckers a lot fun in a zook :twisted:
and weighs more than a commodore v6 . . .
[url]http://www.project-tinfoil.co.nz[/url]
User avatar
Eff
Posts: 146
Joined: Sat Jan 01, 2005 11:14 pm
Location: Melbourne

Post by Eff »

For power most people put in a G13A :D
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

Fourdogs wrote:
Swamp Donkey wrote:lexus v8, all alloy, quad overhead cam, 6 bolt mains factory :shock: ,260 ponnys= cheap from the import wreckers a lot fun in a zook :twisted:
and weighs more than a commodore v6 . . .

What have you been smoking??

I have picked up a dry lexus V8 by myself before.

I couldn't however lift the bare heavy arse cast iron block of the crummydore V6 off the floor.

lexus V8 would be a grat conversion for a zook :D
[url]www.twinstickoffroad.com[/url]
Posts: 231
Joined: Mon Dec 20, 2004 9:43 am
Location: lost in my pile of parts

Post by Tim D »

Whats wrong with a motor-bike engine and box ? fast light and power. Aussie racing cars use them, (the mini V8 super cars).
my 2 cents.
;)
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Tim D wrote:Whats wrong with a motor-bike engine and box ? fast light and power. Aussie racing cars use them, (the mini V8 super cars).
my 2 cents.
;)
Compare the weight and usage of aussie race car to vitara. Unless he plans to halve the vits weight and drive it at 8,000rpm all day, i think this might not really provide him with his "power" rush.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

Tim D wrote:Whats wrong with a motor-bike engine and box ? fast light and power. Aussie racing cars use them, (the mini V8 super cars).
my 2 cents.
;)
There was for a brief period; a guy in the UK who was manufacturing his own engine blocks to convert 2, yes I said 2!!! Suzuki GSX-R 1000cc motorbike engines into a single 2Litre V8 :armsup: :armsup: :armsup:

That would be a sweet conversion for ANY zook. :D
[url]www.twinstickoffroad.com[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests