Hi chaps,
Weve just got back from our trip in the center doing the west and east McDonald Rangers, Palm valley, and kings canyon etc etc etc.
Did 5223kms.
Oil was just over the full mark before we left. As I did an oil change (yep another one) before we left.
Monitored it each day as we went along, and it slowly dropped in level.
Its now 2/3 the way down between the High and Low mark.
Is this excessive oil consumption for a 2.8, or do they normally chew thru a bit of oil.
Its got 243 000 on the clock.
Just trying to get an idea if its normal with these motors.
I think its a bit high myself, and would have preferred to see a 5mm drop at most in this time.
Using BP vanellus 5w 40.
cheers
Trains
and Yes, we had a ball, saw some great places, met some great people, and really enjoyed ourselves.
got about 9-11 Lts / 100km depending on what we were doing.
Mostly around the 9-10.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Oil burn in 2.8 3L motor
Moderators: toaddog, Elmo, DUDELUX
Oil burn in 2.8 3L motor
Save the Whales......Collect the whole set.
My Wife Can't Shear..............But You Should See Her Crutch !
My Wife Can't Shear..............But You Should See Her Crutch !
Who is online
Users browsing this forum: No registered users and 0 guests