lt230 to zf?

Post by **subaman** » Sun Aug 06, 2006 9:49 pm

Hey guys got a 89 clasic rangie with the borg warner transfer. Just wanted to know If the earlier lt230 from the 3 speed auto will fit behind the zf 4 speed. I just bought a transfer and the serial no. starts with 14d so I figured going by the tech list this would be an earlier one. Any info would greatly be appreciated.

Cheers shaneo

Post by **ashtrans** » Mon Aug 07, 2006 1:55 am

Hi,

you can fit the LT230 in place of the Borg Warner but you will also need to change the RH mount, front propshaft, hand brake mechanism also,

the 14D is a 1.003 ratio, this will be geared too high with a ZF auto,

ratios listed here :

http://www.ashcroft-transmissions.co.uk/part_8.html#pa1

Post by **Loanrangie** » Mon Aug 07, 2006 8:00 am

Dave, isnt the first gear ratio on the TF727 and the ZF almost the same ? like 2.78 versus 2.75 ? In that case you wouldnt notice the difference, one thing to keep in mind though is that the LT230R has roller bearings instead of tapered rollers is harder to get rid of the backlash i believe.

Post by **cloughy** » Mon Aug 07, 2006 9:43 am

It will be to high geared because when the ZF is in overdrive the revs will de down to low and won't maintain highway speeds well

Post by **justinC** » Mon Aug 07, 2006 7:18 pm

Have you driven a 1.003:1 LT230 and torqueflyte???
They could definately do with a 1.222:1 case as they are complete slugs.
I fitted one to a '85 and it would drive and tow 100% better. the owner said The fuel bill improved slightly also, but I think that was wishful thinking...

I also discovered the top speed was unaffected. 140kmh is achievable easily on the flat, but would still see 160 if left long enough.

JC

Post by **cloughy** » Mon Aug 07, 2006 8:16 pm

His silver 4 door is a 3.5 and TF727

Post by **justinC** » Mon Aug 07, 2006 8:21 pm

fit a 1.222:1 case from a 5 speed or ZF disco or rangie then, it will make the '85 driveable.

JC

Post by **cloughy** » Tue Aug 08, 2006 9:20 am

Sorry, his as in loanrangie, so he has driven a 1.003:1 and TF before

Post by **justinC** » Tue Aug 08, 2006 9:58 am

OOPs, I see said the blind man...

JC

Post by **Loanrangie** » Tue Aug 08, 2006 12:22 pm

Yes and it used to go pretty good even on 235/85/16's but it drank like Boonie on an international flight ! I was fitting a 4.4 and zf into to it but as you can see in my avatar, i have updated.

Outer Limits 4x4 Board

lt230 to zf?

lt230 to zf?

Who is online