The missus was on her way home tonight when her feroza decided it would go no more. Seems as though the clutch or drive shaft may have gone?
But not knowing much about em and being dark I couldn't really say... When in gear and the clutch is released it just sits still. Will not drive with any
amount of revs, in reverse or in 4WD either. Its a 90-91 model with a mechanical clutch but couldn't see any problems with cable in minimal light.
If you've got any idea could you let me know.
Cheers!!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Feroza No Drive???
Moderator: Tiny
If it was the rear driveshaft, the front wheels would turn when put into 4wd and hubs locked.
Were you having any clutch problems before?
Will it select all the gears?
Has the transfer lever been bumped into the 'N' position?? I know it sounds silly, but its happened many times.
Only thing I can think of is the link between the gearbox and transfer case. Chain driven? This may have let go... not heard of much though
Were you having any clutch problems before?
Will it select all the gears?
Has the transfer lever been bumped into the 'N' position?? I know it sounds silly, but its happened many times.
Only thing I can think of is the link between the gearbox and transfer case. Chain driven? This may have let go... not heard of much though
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
I had similar in my rocky, hit a bump and the 4x4 lever jumped into N, sorta, but you couldn't physically move it, was jammed. I'm not sure what feroza's are like for access, but if you can, from inside the cab pull apart the top of the gearbox where the 4x4 shaft goes in, and see if anything looks wierd. I stuck a screwdriver down mine, wiggled it around and it fixed it 
Be careful though, just make sure you know how to put all back together as I said i dunno if you can do this on a roza.
Be careful though, just make sure you know how to put all back together as I said i dunno if you can do this on a roza.60 + Turbo, 33"s :armsup:
) 
Who is online
Users browsing this forum: No registered users and 6 guests