I have an un-modified 1980 HJ45 with a good H motor but has worn-out the gearbox and transfer case.
I also have a couple of wrecks with good gearboxes bolted up to buggered engines that I could use behind the H motor if they will fit.
One is a 1983 FJ45 with a 2F and the other is a 1981 HJ47 with a 2H.
Would either of these "bolt straight up"? And if not what needs to changed to make them fit. All the ID plates list the gearboxes in all vehicles as H41, don't know about the T-case.
Anybody know? Or should I drag the old HJ45 to the dump with all the others and start again?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Another 40 series gearbox Q
Moderators: toaddog, Elmo, DUDELUX
Another 40 series gearbox Q
BJ40 (B)
FJ40 (2F)
FJ73 auto (3F)
79 series (1HZ)
79 series (1HDFTE)
100 series auto (1HDFTE)
FJ40 (2F)
FJ73 auto (3F)
79 series (1HZ)
79 series (1HDFTE)
100 series auto (1HDFTE)
they'll all bolt up no worries. the Tcase is a later model split case (but that's a good thing), you can either mod the t-case crossmember to fit the hj45, or just leave it off. piece of piss.
only h41's that don't bolt up to the 6cylinders (petrol or diesel) are the ones behind the B series 4 cylinder diesels
only h41's that don't bolt up to the 6cylinders (petrol or diesel) are the ones behind the B series 4 cylinder diesels
Spit my last breath
Who is online
Users browsing this forum: No registered users and 119 guests