Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2 batteries in one whats going on!!!!

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 287
Joined: Sun May 01, 2005 2:33 pm
Location: Sydney

2 batteries in one whats going on!!!!

Post by michael a »

Hi All,

I got a battery of one of my mates. It is a power beat Made in NZ looked at web page didnt look like a battery producer.

The battery has 12 cells. I know that you are thinking its 24volt because each cell holds about 2.1 volts but its not.
There is one neg terminal and a strange set up on pos. There is 2 small positive terminal and 1 large one.
1 small is linked to the large one. there is a module that joins the other terminals together.
Its only 12 volts

Apprently this is a discharge managment system. Also there is a lead from the module to the neg terminal.

ANY IDEAS
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

We use a 16v battery in the racecar. It has 1 negative terminal, and a positive terminal on the 6th cell, and another positive on the 8th cell.
You hook up the ignition system to the 16v, and everything else to the 12v.
Is that similar?
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 287
Joined: Sun May 01, 2005 2:33 pm
Location: Sydney

Re: 2 batteries in one whats going on!!!!

Post by michael a »

michael a wrote:Hi All,

I got a battery of one of my mates. It is a power beat Made in NZ looked at web page didnt look like a battery producer.

The battery has 12 cells. I know that you are thinking its 24volt because each cell holds about 2.1 volts but its not.
There is one neg terminal and a strange set up on pos. There is 2 small positive terminal and 1 large one.
1 small is linked to the large one. there is a module that joins the other terminals together.
Its only 12 volts

Apprently this is a discharge managment system. Also there is a lead from the module to the neg terminal.

ANY IDEAS


Na its only 12 volts. both terminals are 12 volts there are 2 batteries inside this wired in parrell with that module.
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

i thought powerbeat company went belly up ages ago ??

the idea behind it is like running dual batteries, one for start and one for everything else. that way if you leave the lights on you can always have enough the start the car.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest