Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Can't get 5th gear in GU
Can't get 5th gear in GU
Hi All,
I was driving down the freeway last night, Just cruising in 5th, and it popped out of gear (hasn't done that before). When i tried to put it back into 5th it was grinding teeth. Pulled over and tried putting it into 5th while stopped and it goes in ok but get off the clutch and its grinding teeth and going nowhere. Still went into all other gears ok but i could hear a slight grinding of teeth when in 1st and reverse.
Oh, its a 2000 GU 4.2 td with 186,000 on the clock.
Is this common with these? I thought these gearboxes were tuff as nails?
Does this sound like a gearbox rebuild? Sounds to me like 5th gear has slipped out of alignment or something.
Anyone got any ideas?
Thanks,
Mark
I was driving down the freeway last night, Just cruising in 5th, and it popped out of gear (hasn't done that before). When i tried to put it back into 5th it was grinding teeth. Pulled over and tried putting it into 5th while stopped and it goes in ok but get off the clutch and its grinding teeth and going nowhere. Still went into all other gears ok but i could hear a slight grinding of teeth when in 1st and reverse.
Oh, its a 2000 GU 4.2 td with 186,000 on the clock.
Is this common with these? I thought these gearboxes were tuff as nails?
Does this sound like a gearbox rebuild? Sounds to me like 5th gear has slipped out of alignment or something.
Anyone got any ideas?
Thanks,
Mark
My 4.8 petrol let 4th gear syncro go at 40,000 klm's - fixed under warranty.
There have been others advising problems with the 4.2 g/box.
There have been others advising problems with the 4.2 g/box.
____________________
Dan
[quote="v840"]I bet you're the kind of person, when you're railing someone in the ass
you don't even have the common courtesy to give them a reach around! [/quote]
Dan
[quote="v840"]I bet you're the kind of person, when you're railing someone in the ass
you don't even have the common courtesy to give them a reach around! [/quote]
These gear boxs had a weak 5th gear, it would strip the spline on the main shaft that mounts 5th gear. thay have a replacment 5th gear and main shaft that is stronger, as the old one was not tight enough on the shaft and would chatter untill failure. Nissan where replacing these under warranty as it is a common fault, check with them, Cheers Phill.
Living the dream on the hill that floods
As mentioned above. This happened to my parents GU on the way to Sydney, shaft stripped the spline, they fitted an upgraded shaft and gear etc they paid for it themselves and cost a couple of g's from memory. I would definately visit the Nissan Dealer before you get it fixed, otherwise it is going to cost you a few $$.
Thanks for the replies guys.
I will give Nissan a try in the morning and hopefully get it done without it costing me an arm and a leg. That would be great!! I could really do with getting it done as a warranty job as I don't have a spare few G's laying around for that! Would much rather spend that sort of money on a winch and diff locks
Thanks,
Mark
I will give Nissan a try in the morning and hopefully get it done without it costing me an arm and a leg. That would be great!! I could really do with getting it done as a warranty job as I don't have a spare few G's laying around for that! Would much rather spend that sort of money on a winch and diff locks
Thanks,
Mark
jjdd
This has also quite common in the 3.0's also, 5 and 4th tend to strip. Replaced under warranty.
you know you want one
the problem was on the mainshaft where 5th gear sits is only half splined and it has a machined spacer infront of it and on the revised shaft it is fully splined and the gear is longer to take up where the spacer used to go, i used to be a tech at a nissan dealer and did quite a few of these box's nissan were even doing them out of warranty for free because it was a known problem
GQ LWB TD42, boost, lockers etc
http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
UPDATE
Nissan have knocked back my claim on this as the car is 6 years old and has 186,000k's. "Too old, too many k's" ..... BUGGER!
quote for repair from Nissan ("getting a good deal from dealer") $2237.70
or for a brand new box $3615.00 fitted. Doesn't seem too bad for a brand new box but i think it'll be a rebuild and save the $1400.
Nissan have knocked back my claim on this as the car is 6 years old and has 186,000k's. "Too old, too many k's" ..... BUGGER!
quote for repair from Nissan ("getting a good deal from dealer") $2237.70
or for a brand new box $3615.00 fitted. Doesn't seem too bad for a brand new box but i think it'll be a rebuild and save the $1400.
hey mate,MJP wrote:UPDATE
Nissan have knocked back my claim on this as the car is 6 years old and has 186,000k's. "Too old, too many k's" ..... BUGGER!
quote for repair from Nissan ("getting a good deal from dealer") $2237.70
or for a brand new box $3615.00 fitted. Doesn't seem too bad for a brand new box but i think it'll be a rebuild and save the $1400.
sandy at aus4wd does repairs on these gearboxes i told him about it and i dont think you will need to spend that much.
try giving him a call 9758 4899 it might be alot cheaper
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
revised Update.
Nissan have agreed to cover the cost of parts (5th gear and mainshaft only) which reduces the price by a couple of hundred dollars. Better than nothing and enough to make me agree to have Nissan fix it. It beats the lowest quote i got from a gearbox place and includes all the bearings and seals being replaced.
Also means i keep the servicing with Nissan as it has been so far which i think is the only reason they agreed to help me out. The car is 3 years past warranty and 85000k's over as well.
Thanks for the input and hope nobody else has to do this.
Cheers,
Mark
Nissan have agreed to cover the cost of parts (5th gear and mainshaft only) which reduces the price by a couple of hundred dollars. Better than nothing and enough to make me agree to have Nissan fix it. It beats the lowest quote i got from a gearbox place and includes all the bearings and seals being replaced.
Also means i keep the servicing with Nissan as it has been so far which i think is the only reason they agreed to help me out. The car is 3 years past warranty and 85000k's over as well.
Thanks for the input and hope nobody else has to do this.
Cheers,
Mark
Who is online
Users browsing this forum: No registered users and 0 guests