Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.5TDI or 2.8TDI, what do I have?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 271
Joined: Thu Mar 23, 2006 10:25 pm
Location: Nepean

2.5TDI or 2.8TDI, what do I have?

Post by psycronic »

I have a oct/91 built NH pajero GLS but am not sure if I have a 2.5 or 2.8 diesel.

I haven't had a chance to find the engine number to confirm what it is (not sure where to find them), but after looking in the haynes 83 - 96 manual and from the pics I'm thinking I may have a 2.8 fitted.

On the rocker cover it has a sticker stating a 94 build date, also the dipstick is located on the passenger side, (not drivers side like the manual shows). Also the engine bay almost completely matches the picture for the 2.8 engine bay.

Where can I find the engine numbers for both engines, and is there an easy way to work out which one i have?

cheers
Posts: 315
Joined: Thu Jul 29, 2004 6:53 am
Location: South Australia

Post by cookie monster »

not sure where engine no. is, but if it matches the pics in the manual(the engines do look very different) it probably is a 2.8.
the main difference i can see in the pics is the difference in the rocker cover and front pulley cover.
looks like you may have scored yourself the later motor. i think they did use them from about 95 on, so a 94 build date matches ?
cookie monster
99 GU Patrol Wagon 4.2td
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

The obvious differance is the 2.5 has a plastic cover over the timing belt where the 2.8 has an alloy cover over a chain
J Top
Posts: 29
Joined: Fri Aug 12, 2005 8:39 pm
Location: Taranaki New Zealand

Post by matwelli »

plus if its a factory 2.8, you will also have a factory 30mm body lift
Cheers

Mat
----------------------------------------------------------
92 Pajero 3.0V6 - 91 Pajero 2.5TD
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Check out the compliance plate under the bonnet or on the firewall.
4M40 = 2.8
4D56 = 2.5
I just luv my "clacker Jabber"
Posts: 271
Joined: Thu Mar 23, 2006 10:25 pm
Location: Nepean

Post by psycronic »

J Top wrote:The obvious differance is the 2.5 has a plastic cover over the timing belt where the 2.8 has an alloy cover over a chain
J Top
yep its a 2.5 then.


The pics in the haynes manual made it confusing.


cheers
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests