Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hey there as the topic says, im in the process of building and fitting sliders to my bundy, all is looking good, now the fish plates that are welded to my chassis which the sliders are welded to double as some chassis strengthenin as i had a little rust in that low section in the middle of chassis, now all will be srayed with rust kill black after sufficient rust proofing, only problem is i cant find anyway of cleaning the chassis rails and underbody of car before painting. any tips, sorry for the long post
cheers
gerni wont work, no degreasers i have tried have worked, there must be some solvent short of hyrdoqlaric acid, great spelling. too tired
can you hire these or whats the go, the Hammercrete Concrete depot has one, they appear to work fine, would need to use it at my house, car isn'tmobile at present
use KENCO SHIFT IT. spray it on and let it soak in and blast it off with a pressure washer. it will remove mud oil grease. you can get it from auto one or repco
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
I bet I am not the only one here with this either...I have that bastard fine red dirt all over the chassis, which does not even come off with a karcher...
It does not worry me too much except if I paint over it, maybe preventing the paint from sealing?
