Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
having trouble going in to 2nd
Moderators: toaddog, Elmo, DUDELUX
having trouble going in to 2nd
hey guys me lux is havin trouble goin in to second gear, not havin any trouble with any other gear only second dose any one hav any ideas????? i thought it might hav been me clutch for a sec but i dunno im not a transmission guy! so any help would be apreciated!
cheers
tyler
cheers
tyler
[b][i][u][color=#0000BF] just another nutter with a hilux [/color][/u][/i][/b]
I have exactly the same problem with my 4runner. From 1st to 2nd is usually OK but from 3rd back to 2nd is a problem. You need to tickle it in.... sort of double clutch it. Tried changing to thinner oil but still happens.
I just changed my rear diff centre to 4.8 (from 4.5...... need a front one now) and the problem is still there but is much better. I thought it would have made it worse.
Like simkell said...... I think its the syncro.
Ricky
I just changed my rear diff centre to 4.8 (from 4.5...... need a front one now) and the problem is still there but is much better. I thought it would have made it worse.
Like simkell said...... I think its the syncro.
Ricky
I have exactly the same problem with my 4runner. From 1st to 2nd is usually OK but from 3rd back to 2nd is a problem. You need to tickle it in.... sort of double clutch it. Tried changing to thinner oil but still happens.
I just changed my rear diff centre to 4.8 (from 4.5...... need a front one now) and the problem is still there but is much better. I thought it would have made it worse.
Like simkell said...... I think its the syncro.
Ricky
I just changed my rear diff centre to 4.8 (from 4.5...... need a front one now) and the problem is still there but is much better. I thought it would have made it worse.
Like simkell said...... I think its the syncro.
Ricky
If it only hapens when it is cold 9 times out of 10 it is because of the oil is in need for a change to something a bit thinner. My 80 has this problem now I just have to get motivated to do something about it.
JT Fibreglass Products.
Manufacturers of quality fibreglass products.
www.jtfibreglassproducts.com.au
Manufacturers of quality fibreglass products.
www.jtfibreglassproducts.com.au
Sounds like thinner oil may be the go. Mine has whatever the caryard threw at it before putting it on the block, could be anything really.
I will try some new standard viscosity oil and hopefully it will help.
It is a worry when your gearbox does not perform as well as you would like and expensive if it up and Sh-ts itself.
Cheers Struth.
I will try some new standard viscosity oil and hopefully it will help.
It is a worry when your gearbox does not perform as well as you would like and expensive if it up and Sh-ts itself.
Cheers Struth.
ok
hey fellas and hey tyler.what you been doin man? my lux is the same to, 1st to 2nd and 3rd back to 2nd,2nds just shit house especially when cold.first gear change each mornin is nearly impossible so im thinkin a thinner oil may help me a bit hey?
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Just as a point of interest..........
My clutch master cylinder died the other day. Installed a new one (non-genuine $89.00) and it improved my gear change into 2nd a bit more. The problem did not go away 100%........ but it is better.
I didn't realise how bad my clutch was generally operating as I was so used to it. Much smoother action now
Ricky
My clutch master cylinder died the other day. Installed a new one (non-genuine $89.00) and it improved my gear change into 2nd a bit more. The problem did not go away 100%........ but it is better.
I didn't realise how bad my clutch was generally operating as I was so used to it. Much smoother action now
Ricky
The work cost me a total of $187.00 including 1 hour labour, fluid and the master cylinder. I have a good machenic that looks after me (although he is a LPG installer so he is as busy as at the moment) I got non genuine as the Toyota master cylinder was $300+.
Let me stress the going into 2nd problem did not totally go away.... but it did improve it. However, the clutch feels sooooo much better now.
I am not recomending to run out and do it, but if you clutch action has been a bit suspect (dropping to the floor on ocation.... especially when hot) then I would get it checked out.
Ricky
Let me stress the going into 2nd problem did not totally go away.... but it did improve it. However, the clutch feels sooooo much better now.
I am not recomending to run out and do it, but if you clutch action has been a bit suspect (dropping to the floor on ocation.... especially when hot) then I would get it checked out.
Ricky
oil
Well done my gearbox oil change and used synthetic gear oil and it made the change a lot better but not perfect. As the 80s use 3.9 lts of oil I draind 500ml and added 500ml of auto trans oil and what a diffrance,
I've never had such a smooth change. By the way I seeked advice from 3 machanic shops before I did it. Let me know how you go.
I've never had such a smooth change. By the way I seeked advice from 3 machanic shops before I did it. Let me know how you go.
JT Fibreglass Products.
Manufacturers of quality fibreglass products.
www.jtfibreglassproducts.com.au
Manufacturers of quality fibreglass products.
www.jtfibreglassproducts.com.au
Definately has to be synchro, this is the gear you really give hell changing to get off the mark or if ya see Harold Scruby crossing the road.
Seems to happen a bit in trucks between 2nd and 3rd, same deal. Well thats how it was explained to me and it makes sense.
Double shuffle between first and second, simply pull the clutch out and push it back in while you are changing up and give a few revs as you change down. If it then is still a pita get it repaired.
Seems to happen a bit in trucks between 2nd and 3rd, same deal. Well thats how it was explained to me and it makes sense.
Double shuffle between first and second, simply pull the clutch out and push it back in while you are changing up and give a few revs as you change down. If it then is still a pita get it repaired.
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
I pity my brother when she is a teenager[/quote]
Who is online
Users browsing this forum: No registered users and 8 guests