Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ZD30 Conversion to gas

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 41
Joined: Fri Mar 31, 2006 2:41 pm

ZD30 Conversion to gas

Post by Richo GU »

Got a series 4 GU ZD30. With the known early problems in series 1 and 2 range would converting to gas create a problem for this motor and will it void my waranty. Have a quote so far of 4300 froma reputable company so with rebate would be 2300.

Cheers
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

i take it you mean the fumation or part lpg system.

it would be interesting to see how it goes, tho i wouldn't want to pour on the lpg purely for power. what i would like to know is how the systems run with muilti injections. the intiall "pre injection" may set off the lpg before the main fuel load gets injected.

and yeah these system will void any warranties.
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

mate i doubt it would void your warranty unless it causes a problem , th 3.0 ltr is a proven lemon and i would not want to push it.
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

mmm.......roll up to Nissan with blown motor, i'll bet they would take one look at ANY aftermarket motor mods and tell ya where to go! especially if you've got lpg/nos/boost controllers etc on it.

thats the curse of having new vehicles, any mods is an excuse for the manufacture to get out of any warranty claims.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: ZD30 Conversion to gas

Post by bogged »

Image
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Bruce, you have to be more specific ;)

Image
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 41
Joined: Fri Mar 31, 2006 2:41 pm

Post by Richo GU »

awill4x4 wrote:Bruce, you have to be more specific ;)

Image
Thanks fella's point Taken :twisted:
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

awill4x4 wrote:Bruce, you have to be more specific ;)

Image
is that copyright, or can I use it on my gupatrol site?
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

bogged wrote:
awill4x4 wrote:Bruce, you have to be more specific ;)

Image
is that copyright, or can I use it on my gupatrol site?
I know you're going to use it anyway Bruce ;)
By the way, a friend of Greg's at work just had the turbo shiat itself in his series 3 ZD30 while he was travelling north.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

awill4x4 wrote:
bogged wrote:
awill4x4 wrote:Bruce, you have to be more specific ;)

Image
is that copyright, or can I use it on my gupatrol site?
I know you're going to use it anyway Bruce ;)
By the way, a friend of Greg's at work just had the turbo shiat itself in his series 3 ZD30 while he was travelling north.
see the one on ebay for $9k? with blown donk
Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests