Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ZOOK finally got the chop now with pics(not 56k friendly)

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

ZOOK finally got the chop now with pics(not 56k friendly)

Post by Klappers »

Sorry about the long delay people but I have been very busy with moving and lining up stuff to go to WA. Anyways, I finally cut the zook in half last weekend!! YAY! So now all i have to do is sus out a tray and tidy up the cuts i made and weld the back section on (behind the passenger and driver) so that water doesnt come gushing in!!! Anyways, besides that, I have been looking into doing a roll cage as well...seems like the best protection for me and my missus!!!! Was thinking one hoop over the back of the body (just behind the seats) and then run that down through the tray? Will post some photos asap..will be taking them tomorrow :)
Last edited by Klappers on Tue Sep 05, 2006 12:43 pm, edited 2 times in total.
DISCO TIME!
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

perhaps a members thread?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

When are you comming to WA and were are you going to live drop me a line when you get here so that we can organise to get you out wheelin with us .

Duncan
Team Evolution
Top
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

We need pics :cool:
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

yes we do need pics. Sorry about that guys been so busy with the move and shit. Will be going over there at the end of sept :) Will have to come out for sure guys.
DISCO TIME!
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

Okay, some more information. 1988 WT soft top. Now chopped in half :) That was so much fun. Now comes the hard part. Putting it all back together..wooops. Anyways pics will be up tomorrow.
DISCO TIME!
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

one more thing before i go today...going to cut the sills off...can anyone say RUST. So will be using tube from my old bullbar and make it into some custom rock sliders...

When finished
1. F&R Air lockers (already have)
2. Vit 1.6L carby
3. 3" Lift (sorting out now)
4. 32" Pedes on 15*8 ROH -12 rims(already have)
5. Custom Tray.
DISCO TIME!
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

so what happened to Bretts old rig you bought? Is this a rebuild of the yellow one or is this a completely new build?
Ransom note = demand + collage
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

grimbo wrote:so what happened to Bretts old rig you bought? Is this a rebuild of the yellow one or is this a completely new build?
Was kinda wondering this myself. I'm figuring he had some problems getting it rego'd??? Klappers, what's the beef mate?
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

The beef being that I would not have been able to get it reg'od. And I didnt want to touch it more than what I had to. If I had wanted to keep it I would have to have taken out the coils and put back in the leafs (not a big job i know), and to be serious I couldnt be bothered. So I swapped it for a stock 1988 WT SWB ST. But I am stripping all the good bits out of bretts rig. So parts I have off bretts rig are

1. AirLockers front and rear
2. 32" Centipedes
3. 1.6L Vitara motor.

So thats about 4 grands worth of stuff and I am going to swap it all over to the new rig AFTER i get it on the road ....

Also, there was problems with brett hacking up the floor plan and removing the drivers seat rail and welding plates on top of it....To much to have to change to get it on the road
DISCO TIME!
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

pics
DISCO TIME!
Top
Posts: 212
Joined: Wed Jul 06, 2005 7:10 pm
Location: Perth, Western Australia

Post by HotAe92 »

looks like we have another competitor for the gymkhana, hey dunc!
'04 NP DiD Pajero: 2" Lift, 33's, ARB Bar, XD9000 Winch, Rear ARB Locker, Snorkel, Dual Batts and Much More...
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

Image


Image



Image


Image
DISCO TIME!
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

more pics

Image
DISCO TIME!
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

Image
DISCO TIME!
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

Image
DISCO TIME!
Top
Posts: 763
Joined: Wed Jun 16, 2004 3:58 pm
Location: Victoria, Australia

Contact:
Contact vicelore

Post by vicelore »

nice pics man looks like a big job . nice detail camera probaly will answer allot of peoples questions about what it will look like if they want to do it.
91 SWB sierra, 2in spring lift, 2in BL 32 simex ETs, Series 4 RH gearing.

[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
Top
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

Lookin good. What sort of tray are you going to put on it?
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

yeah will be making something like this...will also put up measurement so that other people can just copy it...

Image
Image
Image
DISCO TIME!
Top
Posts: 1958
Joined: Thu Sep 01, 2005 11:01 pm
Location: Nowra, NSW

Post by chunkz »

crikey mate
she looks fantastic
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

vicelore wrote:nice pics man looks like a big job . nice detail camera probaly will answer allot of peoples questions about what it will look like if they want to do it.
hehehe, yeah thats about 30% of the actual photo size...anyways. will be show more work in the next week or so..Tidying up the back and making sure that it is flat so that i can tack on the sheet (prob .5mm thick) metal on the back
DISCO TIME!
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

chunkz wrote:crikey mate
she looks fantastic
those photos of the yellow car with the black tray is not mine..just going to be running a tray similar to this
DISCO TIME!
Top
Posts: 37
Joined: Wed Jan 04, 2006 5:32 pm
Location: perth WA

OMG!!!

Post by chippieleigh »

That tray is insane, that whole truck is sweet . was wondering where the spare goes though. will your ride be ready for the gymkhana over here in WA in oct ? More here if you havn't heard WWW.4wdgymkhana.com.au Your build up has got me excited bout building my own, decided a while back I wanted a LWB tray back then seein yours got me ichin, but not in the situation to start yet . I'll just have to keep an eye on yours for now. Will be real interested in the tray measurements inthe future though .
Top
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Contact:
Contact ofr57

Post by ofr57 »

rhetts tray looks alot smaller in those pictures then given ... also it looks alot sweeter in real life :D
[color=green]Vote Earth[/color]
Top
Posts: 10
Joined: Sun Jul 09, 2006 4:59 am
Location: Milaca, Minnesota.

Contact:
Contact john1974

Post by john1974 »

Like the flatbed, if my rear keeps rusting away.. I might go this route.
Zuknation.net : A Suzuki/GEO online 4x4 community http://zuknation.net
Top
Posts: 165
Joined: Sun Dec 25, 2005 11:08 am
Location: Seville Grove, Perth

Post by Klappers »

going to go to a metal supplier on the weekend and sus out prices for some RHS and 5mm checker plate :) And then measure it all up....
DISCO TIME!
Top
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

Will you be running a full size spare tyre with your tray design?
Top
Posts: 337
Joined: Tue Jan 18, 2005 10:16 pm
Location: Gympie

Post by small talk »

With your materials for the rear of the cab, myself and others have used 3mm was plenty tuff, and 5mm is that for the tray top?? i think mine was 2.6 or 3mm just think of the wieght factor as its only a sierra remember what u cut off probly made of old coke cans so doesnt wiegh much.
1984 Hilux dualcab.
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Looks good, i especially love how you didnt remove the fuel lines beforehand lol :cool:
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Red_Zook
Banned
Posts: 2041
Joined: Mon Jan 24, 2005 7:41 pm

Post by Red_Zook »

PJ.zook wrote:Looks good, i especially love how you didnt remove the fuel lines beforehand lol :cool:
mmm bbq human for lunch
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 78 guests