Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

*WANTED* INFO ON CARBY/MIXER ON LPG SET UP ON GQ(with pics)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 686
Joined: Sat Mar 12, 2005 12:34 pm
Location: maitland, nsw

*WANTED* INFO ON CARBY/MIXER ON LPG SET UP ON GQ(with pics)

Post by bucketofbolts »

just wanting to know where the mixer sits on the carby, to run duel fuel, the mixer i have, has a throttle cable set up and so does the throttle body,

its a 300A impco mixer, and standard 1990 GQ carby, ( not fuel injected),

any help would be good, or pics, thanks

would this work, a mate has it on his 60 seriers, or do i have to stay with the 300A impco

Image

Image

Image

or

Image
Last edited by bucketofbolts on Thu Sep 07, 2006 9:00 pm, edited 3 times in total.
bucketofbolts is sold, :(
Top
Posts: 827
Joined: Thu Apr 28, 2005 7:52 pm

Post by F'n_Rover »

I'm a bit confused ?
The top pic looks like a straight gas throttle body and mixer in one ?
You'll need to seperate the top section and mount it to your carby. (unless you want to run straight gas)

The bottom pic is just a simple spud style mixer - which IMO - shit all over the fancy carby top type mixer setups.
Top
Posts: 686
Joined: Sat Mar 12, 2005 12:34 pm
Location: maitland, nsw

mixer

Post by bucketofbolts »

so what would be your choice, as i want to run duel fuel
bucketofbolts is sold, :(
Top
Posts: 48
Joined: Wed Jan 14, 2004 11:00 pm
Location: Thomastown, Vic

Post by GQPatrol V8 »

Use the 300A which is the top section and buy an adapter that connects it to the Nissan GQ Carby.

The bottom pic is a ring type mixer used with the Euro type systems. No good to you if you are gonna run impco setup.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Looks like you still need a few parts to get either to work, the gas ring on the bottom i dont think will fit a gq carby as i think they have a rectangular top ?
The impco system is dead simple and work well on dual fuel.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 686
Joined: Sat Mar 12, 2005 12:34 pm
Location: maitland, nsw

Post by bucketofbolts »

ok, so where do i split the mixer(top picks)
bucketofbolts is sold, :(
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

bucketofbolts wrote:ok, so where do i split the mixer(top picks)
There are 3 screws on the top of the lower section of the mixer, you can see the round head in the top pic almost central near the diaphram. On the third pic you can just see the hex head below the yellow edge of the diaphram.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 686
Joined: Sat Mar 12, 2005 12:34 pm
Location: maitland, nsw

Post by bucketofbolts »

this is what i've got now, is that what i use,

Image

Image
bucketofbolts is sold, :(
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Yes, now you need an adapter and a filter housing .
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 186
Joined: Wed Aug 30, 2006 3:06 pm

dual fuel

Post by Chook350 »

If you decide to run dual fuel get the electronic ignition upgrade for the dizzy otherwise you will forever have probs with the points. genral rule of thumb choose what fuel you will run 99% of the time, ie: lpg or petrol and tune the engine for that fuel, timing diffrences will make a lot of diffrence to power and economy
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest