Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

vit to lux transfer

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 85
Joined: Sun Aug 07, 2005 9:47 pm
Location: kurri kurri newcastle

vit to lux transfer

Post by mysterioussasvit »

i bought some gears for the vit if i ever get them off sam at overkill but thats another thing altogeather (NOT HAPPY) was thinking about doing a sye but a lot of work and the lux top shift has flanges already. is the vit transfer ratio standard lower or higher than the lux one i know i have to make up adapter plates but it will also line the front shaft up better with the lux diff in the front . also i know A1 and hypozook are doing this a.t.m how long is the gear box and transfer from rear flang to bellhousing for a ruff idear on how long my shaft will be in the rear being a shortie wont expect it to be to long after this
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

Re: vit to lux transfer

Post by SiKiD_01 »

mysterioussasvit wrote:i bought some gears for the vit if i ever get them off sam at overkill but thats another thing altogeather (NOT HAPPY) was thinking about doing a sye but a lot of work and the lux top shift has flanges already. is the vit transfer ratio standard lower or higher than the lux one i know i have to make up adapter plates but it will also line the front shaft up better with the lux diff in the front . also i know A1 and hypozook are doing this a.t.m how long is the gear box and transfer from rear flang to bellhousing for a ruff idear on how long my shaft will be in the rear being a shortie wont expect it to be to long after this
bwahahahahahahah

anyway, i have no idea about the lux box or transfer. i know SYE are not too easy to do. need special drill to drill case hardening and super good tap for thread. and other stuff too.

so if you go hilux transfer, how much for the vit crawler gears?
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Posts: 85
Joined: Sun Aug 07, 2005 9:47 pm
Location: kurri kurri newcastle

Post by mysterioussasvit »

if i ever get the last gear off sam i will let you know its been almost 3 months maybe longer who knows im over it (p.s sam if you read this wheres my f*#king gear or at least call me!!!!!!!)
Posts: 219
Joined: Thu Aug 12, 2004 11:57 am
Location: Newcastle

Post by Huggy »

when it comes time for you todo your shaft let me know as the other 1/2 works at a place that makes drive shafts and are you a dad yet ?
Now with locked diff to keep up with rav4s
Posts: 85
Joined: Sun Aug 07, 2005 9:47 pm
Location: kurri kurri newcastle

Post by mysterioussasvit »

yes little boy ewan. another vitara driver cause there is no way he will be driving a bloody sierra . b.t.w might just take you up on the offer about the drive shafts
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests