Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
vit to lux transfer
vit to lux transfer
i bought some gears for the vit if i ever get them off sam at overkill but thats another thing altogeather (NOT HAPPY) was thinking about doing a sye but a lot of work and the lux top shift has flanges already. is the vit transfer ratio standard lower or higher than the lux one i know i have to make up adapter plates but it will also line the front shaft up better with the lux diff in the front . also i know A1 and hypozook are doing this a.t.m how long is the gear box and transfer from rear flang to bellhousing for a ruff idear on how long my shaft will be in the rear being a shortie wont expect it to be to long after this
Re: vit to lux transfer
bwahahahahahahahmysterioussasvit wrote:i bought some gears for the vit if i ever get them off sam at overkill but thats another thing altogeather (NOT HAPPY) was thinking about doing a sye but a lot of work and the lux top shift has flanges already. is the vit transfer ratio standard lower or higher than the lux one i know i have to make up adapter plates but it will also line the front shaft up better with the lux diff in the front . also i know A1 and hypozook are doing this a.t.m how long is the gear box and transfer from rear flang to bellhousing for a ruff idear on how long my shaft will be in the rear being a shortie wont expect it to be to long after this
anyway, i have no idea about the lux box or transfer. i know SYE are not too easy to do. need special drill to drill case hardening and super good tap for thread. and other stuff too.
so if you go hilux transfer, how much for the vit crawler gears?
1995 Vitara:
stock standard
WWW.DARWIN4X4.NET
stock standard
WWW.DARWIN4X4.NET
Who is online
Users browsing this forum: No registered users and 1 guest