Hey all,
Just a quick question regarding the swaybars.
Can u take both the front and rear off all 2gether? or can u encounter problems with the rest of the car?
If u can has anyone done this? is the car still reasonably stable on-road or is it impossible to drive round with them off?
It will only be short term till i can affort disco's.
Cheers guys, ToMMo
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Swaybars on wrangler
Moderator: GUtripper
Swaybars on wrangler
2000 GU CoilCab Ute, 37's, F+R airlokas, Ratios, Turbo work 16lbs, 2'body,2'sus
My dad has a wrangler with 2 inch lift, 31's and adjustable shocks and with the disconects out and the shocks on the stiffest you nearly got see sick going around the block! So that lasted about 3 days till he got a new pin!
Not sure about the back though.
Not sure about the back though.
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
The rear sway bar is pretty thin and only marginally limits the wheel travel if you have the croorect link lengths. I'd recommend keeping the rear attached because not only is it road legal then, but it will work better offroad. The rear connected will help the (disconnected) front flex more proportionally to the rear and it will be more stable.
For the front - swaybar disconnects are cheap and work. You'll be legal on rad and would sway all over the place, and with a pull of a pin you'll get loads of wheel travel.
Preety simple, proven and logical setup
For the front - swaybar disconnects are cheap and work. You'll be legal on rad and would sway all over the place, and with a pull of a pin you'll get loads of wheel travel.
Preety simple, proven and logical setup
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Who is online
Users browsing this forum: No registered users and 1 guest