Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Installing a Pyro on 2LT? how?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 231
Joined: Tue Sep 14, 2004 1:11 pm
Location: Melbourne

Installing a Pyro on 2LT? how?

Post by leehamescort »

G'day, have done a search without any luck,

How have people installed a Pyro on the factory turbo setup? is there a simple place to bolt one into the manifold or do i need to have something fabbed up to bolt into?

Reading previous posts preturbo seems to be the optimum place, but that is heavily debated so before or after is fine just how have people done it?

Mine is the factory surf setup but is bolted to a 2.8 hilux motor not that that should make much difference.

looking at doing some tuning and sounds like a pyro is the first step.

Do i just order a pyro through repco or is there a specific fitting/type that is required, they are pricey buggers so I want to make sure i get the right one.

Thanks for any help.

Leeham
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
Top
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

Re: Installing a Pyro on 2LT? how?

Post by G_loomis »

leehamescort wrote:G'day, have done a search without any luck,

How have people installed a Pyro on the factory turbo setup? is there a simple place to bolt one into the manifold or do i need to have something fabbed up to bolt into?

Reading previous posts preturbo seems to be the optimum place, but that is heavily debated so before or after is fine just how have people done it?

Mine is the factory surf setup but is bolted to a 2.8 hilux motor not that that should make much difference.

looking at doing some tuning and sounds like a pyro is the first step.

Do i just order a pyro through repco or is there a specific fitting/type that is required, they are pricey buggers so I want to make sure i get the right one.

Thanks for any help.

Leeham
I have just installed an Denco turbo to my HJ60...and the fitting for the pyro is on the dump pipe.

If there isnt a spot already allocated to take a pyro...maybe drilling and tapping a thread maybe an option (just a thought - please tell me if I am wrong). Most aftermarket gauges come with there own fittings though, so you would have to get the right thread die.
L.S Canvas & P.V.C
www.lscanvas.com.au
Top
Posts: 5
Joined: Mon Jan 16, 2006 5:31 pm
Location: Hervey Bay

Post by hislux94 »

i just made up a piece of round bar with a thread the same as the one on the probe and just drilled a whole in the dump pipe as close to the turbo as i could and just welded the fitting in, then screwed the probe into the dump pipe.
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

hislux94 wrote:i just made up a piece of round bar with a thread the same as the one on the probe and just drilled a whole in the dump pipe as close to the turbo as i could and just welded the fitting in, then screwed the probe into the dump pipe.
When putting your Pyro in pre-turbo, make sure you remove all the swarf or say bye-bye turbo :cry:
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 238
Joined: Mon Oct 18, 2004 3:44 pm

Post by devo »

i've got a surf with I assume the same gear as you. When I installed my pyro the egr pipe ummm fell off and I made a plate that covered the egr hole in the exhaust manifold. Drilled and tapped the same plate for the pyro probe and all is good.
Top
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

There's not alot of room at your dump pipe, you might have to drill through the fire wall :D . V8 that puppy
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

Whats the point to fit a pryo? What do you expect to gain?
Top
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

gotoy wrote:Whats the point to fit a pryo? What do you expect to gain?
Seeing what the engine is doing. I think the temperature can help show whether the engine is over or under fuelling. Or working too hard ie: going up a hill hauling a trailer. Not 100% but I think it's something like that. Has been discussed previously I think.
Top
Posts: 231
Joined: Tue Sep 14, 2004 1:11 pm
Location: Melbourne

Post by leehamescort »

Devo, thats just the sort of thing i needed to know. Sounds like a perfect way to do it. thanks.

Cheers
Leeham.
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
Top
Posts: 3614
Joined: Sat Nov 02, 2002 9:02 am
Location: Gold Coast

Post by 83 lux »

WTF is a pryo :bad-words:
HOOLAY Wish i could buy boggers for my DH bike
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

83 lux wrote:WTF is a pryo :bad-words:
Top
Posts: 196
Joined: Wed Jan 28, 2004 11:18 pm
Location: liverpool, western sydney

Post by Barney7779 »

pyro = pyrometer = exhaust gas temperature gauge :D
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

Barney7779 wrote:pyro = pyrometer = exhaust gas temperature gauge :D

Yeah ok, thats pretty easy to understand. However what benefit is it? ....apart from just knowing the exhaust gas temperature. I have a boost gauge on my 2Lt but that does not tell me crap.
Top
Posts: 207
Joined: Thu Aug 26, 2004 11:14 am
Location: Queensland,Clontarf

Post by Hales231271 »

http://www.outerlimits4x4.com/PHP_Modul ... =pyrometer

:idea:

Cheers
Dazza
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

83 lux wrote:WTF is a pryo :bad-words:
a person who like setting stuff on fire ... :D
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 522
Joined: Sat Jan 29, 2005 7:40 am
Location: Melbourne, Vic

Post by Toy80Diesel »

+dj_hansen+ wrote: When putting your Pyro in pre-turbo, make sure you remove all the swarf or say bye-bye turbo :cry:
Whats the difference in going pre or post turbo with the pyro? Do you get a different reading?
Shut Up, Get Out, & Start Digging...
Top
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Contact:
Contact Dzltec

Post by Dzltec »

There is a big difference in pre and post turbo temps. The best spot is befor ethe turbo, but to do it properly and not let swarf in its best to remove the turbo.

Thats why they are fitted in the dump pipe.
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

How could it work pre turbo ??



Ahh typing that sentence I realised how ... :roll:
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 56
Joined: Thu Jan 19, 2006 3:50 am
Location: Finland

Contact:
Contact Axel Von Gardan

Post by Axel Von Gardan »

Make sure that pyro temp don´t definatelly go over 900 celsius or you can se BYE BYE to turbo AND engine.(or pistons)
I wouldn´t let it go over 850 celsius, but first I should install pyrometer before saying anything :roll:
It has layed at carage for months :lol:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 6 guests