Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mq coil conversion

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 3
Joined: Tue Sep 28, 2004 8:16 pm
Location: Adelaide

Mq coil conversion

Post by wrick »

G'day, Have a MQ shorty with near new leaf springs. Whats involved in putting coils all round as well .. Wrick
Top
Posts: 4792
Joined: Sun Nov 21, 2004 9:05 pm
Location: Watching out for stray buses

Post by Brendan-s »

lots of welding expertise... to weld onto the cast iron diffs you need to be a good welder... something about heating, THEN welding, then heating again to make sure the weld takes. Other than that, it couldn't be too hard could it? Shock mounts, spring mounts/retainers, 3 link setup.... *dreams*

edit: probably easier to just go ahead and buy a GQ then...
Top
Posts: 3
Joined: Tue Sep 28, 2004 8:16 pm
Location: Adelaide

Post by wrick »

to good to get rid of
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Honestly, why would you bother?
This is not legal advice.
Top
Posts: 965
Joined: Fri Mar 26, 2004 10:09 am
Location: B.F.E

Contact:
Contact RMP&O

Post by RMP&O »

chimpboy wrote:Honestly, why would you bother?
The only reason I would consider it is because I can't have a GQ. If I could have a GQ it wouldn't even cross my mind....
www.rmp-o.com
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

easiest way to do it and the only practical way is to put a pair of GQ diffs with all the coil mounts and link mounts etc all on them already.

that way u get a wider diff ( better tack ) a stronger pair of diffs, and you dont need to do anywhere near the welding... you would save yourself about 2/3 of the welding.

on mq diffs, you would spend loads of time and loads of money and would only gain a few inches of down travel :roll:
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests