Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5th Gear

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 87
Joined: Mon Feb 21, 2005 10:23 pm
Location: perth, W.A

5th Gear

Post by cuzza »

I was talking to my mate yesterday and he said that the patrol 5th gear is not suitable for towing while the landcruiser 5th gear can due to its postion in the box.Is this correct? I thought there was only a weakness in the early GU 4.2td gear boxes. I am just curiouse as i am going up north to Shark Bay in WA, and i will be towing a boat.

cheers
cuzza
Posts: 30
Joined: Fri Aug 18, 2006 3:08 pm
Location: Geelong, Vic

Post by Rem 22250 »

I have heard the same but only in the 3lt's but not in the 4.2's but I could be wrong.
No Hurry
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

3lts are a problem, as for the crusiers they have a lot of problem, 75series at least not sure if they have fixed the problem in the 78series
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

never had any problems with my old 4.2 ute (GU) used to tow cars a bit and trialers full of pumps all around NSW, always used 5th gear
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Rem 22250 wrote:I have heard the same but only in the 3lt's but not in the 4.2's but I could be wrong.
Numerous of the early GU box's had 5th gear issues.

I wouldnt think positioning in the box would make a difference, since the issue was with a shaft, nothing to do with position
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

bogged wrote:
Rem 22250 wrote:I have heard the same but only in the 3lt's but not in the 4.2's but I could be wrong.
Numerous of the early GU box's had 5th gear issues.

I wouldnt think positioning in the box would make a difference, since the issue was with a shaft, nothing to do with position
meh, mine was a 99 model, turbo deisel, hiflow turbo and front mount intercooler, I have heard about 5th gear issues, but have only ever known one that went bang and it was a 3ltr
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Tiny wrote:
bogged wrote:
Rem 22250 wrote:I have heard the same but only in the 3lt's but not in the 4.2's but I could be wrong.
Numerous of the early GU box's had 5th gear issues.

I wouldnt think positioning in the box would make a difference, since the issue was with a shaft, nothing to do with position
meh, mine was a 99 model, turbo deisel, hiflow turbo and front mount intercooler, I have heard about 5th gear issues, but have only ever known one that went bang and it was a 3ltr
theres been more thn that on this board, try EO or the patrol list
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

bogged wrote:
Tiny wrote:
bogged wrote:
Rem 22250 wrote:I have heard the same but only in the 3lt's but not in the 4.2's but I could be wrong.
Numerous of the early GU box's had 5th gear issues.

I wouldnt think positioning in the box would make a difference, since the issue was with a shaft, nothing to do with position
meh, mine was a 99 model, turbo deisel, hiflow turbo and front mount intercooler, I have heard about 5th gear issues, but have only ever known one that went bang and it was a 3ltr
theres been more thn that on this board, try EO or the patrol list
no dought, but it doesnt mean there is a big problem, or 5th cant be used for towing, it just means that is a chance of a manafacturing fault in the shaft or something like that.
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

My oldies GU 4.2ltr turbo 5th gear went bang on the way to Sydney. Theres a slight fault in some of the boxes with the positioning of the gear on the shaft and it basically strips the teeth off the shaft when it goes. They fit an upgraded shaft and kit to fix the issue. It can still be driven in all other gears to get i home if need be, my folks were about 400k's from Sydney when it happened and drove the rest in fourth. I wouldn't recommend it, but sometime you need to just get it somewhere.
Posts: 87
Joined: Mon Feb 21, 2005 10:23 pm
Location: perth, W.A

Post by cuzza »

Looks like i should not worry then. I have a 94 Gq coil cab and have not heard of major problems with the GQ boxes. I am only towing a tinny any way, which weighs 600Kg. Thnaks for the replies guys
Posts: 87
Joined: Mon Feb 21, 2005 10:23 pm
Location: perth, W.A

Post by cuzza »

Looks like i should not worry then. I have a 94 Gq coil cab and have not heard of major problems with the GQ boxes. I am only towing a tinny any way, which weighs 600Kg. Thnaks for the replies guys
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

You've got no worries with a gq mate, mines done heaps of towing over it's 495,000k life and it's never had a prob and trust me I've flogged it while towing!
Posts: 1575
Joined: Mon Oct 21, 2002 1:17 pm

Post by Singo17 »

How much simple misinformation can you get?


To start all 3L and 4.2L TD share the same Gearbox in the GU. Second there was a faulty shaft issue where the fifth cog would sit and basically it would strip off the shaft. Series II on should all be resolved.

Last Nissan fixed mine out of warranty and asked no questions, its a known fault. It is recommended that you tow in 4th. Mine went and it had towed next to nothing in its life.

Anyway the dealer I took mine too in Perth had done at least a dozen shafts on both 4.2 and 3.0L, mine was the 3rd that month. Takes about a two days in the shop to sort out.
Official member of the Babinda Jimmy James Beam III Fan Club

Darth Bobo Honker Hunter Inc, for the up gunned Poodlefaker.

:armsup:"ARMS UP":armsup:
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

This is a mate of mine and can confirm all details in this post ...

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=84520
KRiS
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest