Hey did my first oil change in the 80 yesterday and on the advice of the guy at Repco put Penrite HPR 20-60 in her. I had planned on buying HPR 15-50 but the guy said that because my 1hz had done 313,000 it would most likely burn oil if i put the 15-50 in..
Well I did the change and I swear the engine seems like its running rougher, noisier at high revs etc. Then when I started her this morning it took ALOT longer to crank over than it used to and it idled like shit for about 30 seconds before it slowly got better. WTF?
Should I drop the oil and put back in 15-50 instead or what?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Oil selection for the 1hz?
Moderators: toaddog, Elmo, DUDELUX
Cant hurt
Why dont you do a couple of oil changes one after the other say every 100 or 250k this way you will be giving it a good clean out it might remove a bit of the sludge build up that diesels get. I would also change the oil filter.
Your engine may have been rebuilt previously and not be as worn out as you expect. Had 480 000 on a sd25 before I got rid of her she was still going strong.
Why dont you do a couple of oil changes one after the other say every 100 or 250k this way you will be giving it a good clean out it might remove a bit of the sludge build up that diesels get. I would also change the oil filter.
Your engine may have been rebuilt previously and not be as worn out as you expect. Had 480 000 on a sd25 before I got rid of her she was still going strong.
If you dont have panel damage you ain't trying hard enough
you need 15/40w as the 1hzs are over head cams and the lifters wont pump up with the thicker stuff and in winter they wont even start we had the same problem with diesel jackeroos and petrol astras people putting what ever oil in and complaning that it hard to start or not starting. go back to repco and demand that you want the right oil and that they better hope that the wrong oil hasn't damgaed you big end bearings
HZJ73, lifted,crawler gears, double locked, sitting on 35's
agree
go back to repco and tell the guy hes a fuckwit
300thousand is nothing. That guy needs to be sacked.
thicker oil can cause damage as others have said. I would go to toyota see what they say, and then goto repco and tell them exactly what toyota said. Speak to the store manager of repco and he should give you the correct oil.
go back to repco and tell the guy hes a fuckwit
300thousand is nothing. That guy needs to be sacked.
thicker oil can cause damage as others have said. I would go to toyota see what they say, and then goto repco and tell them exactly what toyota said. Speak to the store manager of repco and he should give you the correct oil.
Honestly i would stick with a good 15w45 oil.BadLux wrote:how bout penrites 15-50 hpr oil is this alright to run in the 1hz,
I'm pissed off now that I spent $80 on 10l of oil that I've gotta drop now and change again. What a rooster!
If you go back to repco, ask to speak to the manager, and tell him toyota has said it can damage your engine and that you want to be compensated for his staff's bad advice. Say you just want a refund. Then buy the correct oil either from them or from somewhere else.
Spoke to a few mechanics and they said it should be fine with the thicker oil atleast for the 5000k's anyway then put the thinner 15-45w oil in on the next change. When I asked about the big end bearings and the thicker oil they said it was better for them??
So instead of causing a fuss and demanding a refund I'm just gonna wait till my next oil change and put the right oil in!! Hopefully it doesn't damage the motor but the mechanics I spoke to said that it's highly unlikely it would. Also going up to steep point in a month towing a boat so they said the thicker oil in the hot weather and under strain would be good anyway..
What do you think??
So instead of causing a fuss and demanding a refund I'm just gonna wait till my next oil change and put the right oil in!! Hopefully it doesn't damage the motor but the mechanics I spoke to said that it's highly unlikely it would. Also going up to steep point in a month towing a boat so they said the thicker oil in the hot weather and under strain would be good anyway..
What do you think??
Watch your oil pressure. if it gets too high it could blow the filter in half. This is common in 2H's when a thicker oil is used(60 weight). Not sure if they addressed it in the 1HZ.BadLux wrote:Spoke to a few mechanics and they said it should be fine with the thicker oil atleast for the 5000k's anyway then put the thinner 15-45w oil in on the next change. When I asked about the big end bearings and the thicker oil they said it was better for them??
So instead of causing a fuss and demanding a refund I'm just gonna wait till my next oil change and put the right oil in!! Hopefully it doesn't damage the motor but the mechanics I spoke to said that it's highly unlikely it would. Also going up to steep point in a month towing a boat so they said the thicker oil in the hot weather and under strain would be good anyway..
What do you think??
also, make sure your top end is all getting lubricated aswell. Thicker oil wont travel as far.
Who is online
Users browsing this forum: No registered users and 7 guests