Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ shakle bushes

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 37
Joined: Tue Jul 18, 2006 11:15 am
Location: shepparton victoria

MQ shakle bushes

Post by rob_rover »

Just brought a mq lwb 1982 model and it needs shakle bushes all around, the rear look to be rubber bushes but the front dont look to be rubber and i was told they have bronze bushes, Does any one know if you can replace these with rubber bushes without any mods needed to be done?
All your reply would be very much useful cheers rob
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

to replace the mq bushes with better ones you need mk springs, mk shackle mount and mk shackles
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Posts: 37
Joined: Tue Jul 18, 2006 11:15 am
Location: shepparton victoria

MQ shakle bushes

Post by rob_rover »

Can't just remove the bronze bushes and fit rubber ones? why? is the diameter different?
Top
Posts: 196
Joined: Sun Mar 26, 2006 5:31 pm
Location: Redcliffe, Brisvegas

Contact:
Contact zer0

Post by zer0 »

u can replace with rubber ones but they have to be custom made
GIVE IT SOME S**T
my build http://www.outerlimits4x4.com/viewtopic.php?t=74420
Top
Posts: 49
Joined: Thu Feb 02, 2006 10:53 am
Location: West Sydney

Post by herks »

I have an MK with standard setup and recently replaced all my bushes, shackles and greasable pins without and problems. Give Carrels Springs a call. They have the complete kit and I found them to be the cheapest.
I used the synthetic ones and got rid of the rubber and steel bushes. Found that the original pins and shackles were worn more then the bushes once I got the old ones out.
Greasable ones are the way to go.
Top
Posts: 37
Joined: Tue Jul 18, 2006 11:15 am
Location: shepparton victoria

MQ shakle bushes

Post by rob_rover »

Hey herk did you just knock the steel bushes out and fix new rubber bushes in with out doing any mods to the shakle mounts? Were the rubbers bushes the same outside diameter as the stell bushes?
Top
Posts: 49
Joined: Thu Feb 02, 2006 10:53 am
Location: West Sydney

Post by herks »

Yes the bushes have an inner and outer steel sleeve with rubber in between. i just knocked out the old rubber ones and inserted the new after getting rid of the rust and crud inside the eye of the spring. Same as on the other end of the shackle. Everything just swapped over. As I said Carrols make a kit to swap it over i just ordered the greasable type.
The new synthetic ones were tight but with a bit of grease slipped in OK.
Top
Posts: 18
Joined: Mon Dec 05, 2005 4:49 pm

Post by Bucks2 »

Hi Herks
What did the Kit cost you??
I have an MK might have to look at mine??
Cheers Mike.
Top
Posts: 4
Joined: Thu Aug 31, 2006 5:28 pm

Post by Demoking69 »

$55 a shackle and $40 for a front bush kit... replaced mine the other day...
Top
Posts: 49
Joined: Thu Feb 02, 2006 10:53 am
Location: West Sydney

Post by herks »

Bucks2
For the complete kit. ie all bushes F/R all shackles and all pins (greasable) I think it was around $240.00. Carrols Springs I found to be the cheapest.
made a hell of a difference too.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests