Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux headlight problem

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 134
Joined: Sat Feb 05, 2005 12:35 pm

hilux headlight problem

Post by macklux83 »

hi guys,i just got another steering column for my hilux as mine was worn to buggery,ive put it in but when i try to put the high beams on the stalk wont move forward,i can pull it back and hold them on and the low beams work fine but no go with the high beams. i pulled the wheel off and on the contact where the light lever is there appears to be a small ball bearing in there stopping the stick from moving out.
any ideas what can be done???
cheers
Top
Posts: 134
Joined: Sat Feb 05, 2005 12:35 pm

Post by macklux83 »

ok sorted that all out but now when i try and click my hi beams on everything else goes out.
:x
Top
Posts: 92
Joined: Wed Sep 28, 2005 11:38 pm
Location: Sydney, Australia

Post by dominic »

i have the same thing on mine.
so far i havent found out what it is.

some please enlighten us!!!


cheers
Dom
85 LN65 D/cab locked with 35's
77 RA28 celica-in parts in perth
Top
Posts: 134
Joined: Fri Apr 22, 2005 10:19 am
Location: Biloela, QLD

Post by Tomolux »

pull the stalk out of the column and than see if the lights work with it not screwed in. if they do than it is something to do with contacts or crushed wire earthing out or something
Top
Posts: 6
Joined: Thu Oct 14, 2004 9:02 am
Location: Wamuran SE QLD

Post by huntagrunta »

in the contacts fellas, pull in apart and clean them up and should work
perrin
Cheers Perrin
Top
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

Search brings up this information....

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=35684
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 21 guests