Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rover

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 79
Joined: Sun Jan 01, 2006 6:42 pm
Location: redcliffe, brisbane

rover

Post by Malcolm01 »

i took my rover for our first drive today and i was pretty dissapointed, basically i could have ran faster when it running on gas... its auto aswell and just seemed really sluggish, running it on petrol was a bit better but still i though it was underpowered... are all rovers like this? if so, is it worth changing to a manual box?
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

sounds like you got something wrong with yours? Mine works fine on both gas and petrol and you cant really tell the difference between either for power. I mean its not power house by any means but goes good for a small 3.5 v8. Im not not sure what the manuals are like but I like the zf 4 speed auto. What type of rover is it? I have a classic rangie.
gas grass or arse no one rides for free
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

what model car/motor? injected or carby?

Simon
Posts: 79
Joined: Sun Jan 01, 2006 6:42 pm
Location: redcliffe, brisbane

Post by Malcolm01 »

84, 4 door rover, its got the 3.5, twin carby
Posts: 463
Joined: Sun Nov 21, 2004 10:15 pm
Location: Kingston,Hobart, Tasmania

Post by justinC »

There you go, it needs a 1.222:1 transfer case mod. It should be the torqueflite model, and possibly the most gutless of them all. Try a bit more ign advance, but on petrol it may ping because it should still have the 9.35:1 comp engine. I would toss the treansfer case and fit a lower ratio one, it'll make it actually accelerate.

JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Posts: 687
Joined: Sun Apr 04, 2004 9:54 am
Location: Sydney

Post by up2nogood »

Then consider how many k's it's done. Big k's = stuffed cam shaft and timing chain = sloooow.
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

if the engine has 300-400k+ on it it needs the cam and lifters and timing gear replaced as said before.

JC is saying its your gearing thats up the sh!t not your motor.

and maybe just needs a good tune?
Posts: 22
Joined: Mon Jan 09, 2006 5:05 pm
Location: Geelong

Post by ARangie »

I have same same.

Just get it to a good Landrover mech, get them to give it a check over, and tune. Mine had vacum leaks on the hoses. Advance was not working, simple fix, timing out, easy fix, adjusted the carbies, not that easy, but made a difference.

The 3 speed is a slug, and worse with bigger tyres, what are your plans for the vehicle and budget, are you mechanical.
Town Vehicle - 02 TD5 SE Disco
Posts: 79
Joined: Sun Jan 01, 2006 6:42 pm
Location: redcliffe, brisbane

Post by Malcolm01 »

well i wana be able to take it offroad so ill spend what ever i have to with in reason.. i was thinking a lift and some offroad tyres to start with. but i guess ill take it for a tune up first. buget is about 3k
Posts: 95
Joined: Mon Oct 10, 2005 11:38 am
Location: Brisbane, Sumner Park

Post by fnukle »

tyres makes the biggest difference in my opinion.
then longer shocks or lockers
Posts: 463
Joined: Sun Nov 21, 2004 10:15 pm
Location: Kingston,Hobart, Tasmania

Post by justinC »

...and gearing changes...
JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests