Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
project
Moderator: Tiny
project
hey people, i'm fixin to take my rocky off the road an into a shop for about a week to a week and a half. here is the list of projects that is going to happen...
tune up (any advice?)
new exhaust
custom made extractors (for free! )
scoop on hood (for looks)
k an n filter (maybe, still debating)
body lift (2 inches)
another front supsension lift (2 inches hopefully, torsion bars was nearly maxed out as first lift)
rear lift (4-5 inches, still stock)
lincoln locker for the front (any downfalls, will i break something quickly? etc etc)
roof cage for the hard top
lighting bar
i think thats it. the rig is hoping to go into the shop around the 15th to the 19th of this month... hoping.. HOPING!!! i'm so excited... all of this for the mere price of $600 plus a partial trade on a nessan sentra se-r that runs but needs a new crankshaft. i got it made!! what do u guys think? i also got a question, what should i do with my rear diff? leave it open? hunting around for a lsd is NOT going to be an easy task, not to mention the price tag that will be tacked on to one. any suggestions there?
tune up (any advice?)
new exhaust
custom made extractors (for free! )
scoop on hood (for looks)
k an n filter (maybe, still debating)
body lift (2 inches)
another front supsension lift (2 inches hopefully, torsion bars was nearly maxed out as first lift)
rear lift (4-5 inches, still stock)
lincoln locker for the front (any downfalls, will i break something quickly? etc etc)
roof cage for the hard top
lighting bar
i think thats it. the rig is hoping to go into the shop around the 15th to the 19th of this month... hoping.. HOPING!!! i'm so excited... all of this for the mere price of $600 plus a partial trade on a nessan sentra se-r that runs but needs a new crankshaft. i got it made!! what do u guys think? i also got a question, what should i do with my rear diff? leave it open? hunting around for a lsd is NOT going to be an easy task, not to mention the price tag that will be tacked on to one. any suggestions there?
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Re: project
SimplyPV wrote:hey people, i'm fixin to take my rocky off the road an into a shop for about a week to a week and a half. here is the list of projects that is going to happen...
tune up (any advice?) Just get it DYNOed
new exhaust - 2" system ??
custom made extractors (for free! )
scoop on hood (for looks) - facing which way....open at front or back ??.....don't forget what was talked about in the other thread about water....you now have an extra hole in which water will drown your filter !!
k an n filter (maybe, still debating)
body lift (2 inches)
another front supsension lift (2 inches hopefully, torsion bars was nearly maxed out as first lift)
rear lift (4-5 inches, still stock)
lincoln locker for the front (any downfalls, will i break something quickly? etc etc) - depends how 'hard' you drive it....if it hasn't broken yet, you must be doing something right
roof cage for the hard top
lighting bar - what lights will you be putting on ??
i think thats it. the rig is hoping to go into the shop around the 15th to the 19th of this month... hoping.. HOPING!!! i'm so excited... all of this for the mere price of $600 plus a partial trade on a nessan sentra se-r that runs but needs a new crankshaft. i got it made!! what do u guys think? i also got a question, what should i do with my rear diff? leave it open? hunting around for a lsd is NOT going to be an easy task, not to mention the price tag that will be tacked on to one. any suggestions there?
Sounds good.
Keep us updated with pics as it comes along !!
[color=orange] BESTY [/color]
GU4800
GU4800
Ferwoaza wrote:Saw a nice Rocky on Saturday night. Rear tray, hilux axles, spring over, holden v6 (I think). Was having petrol pump problems (actually towed into the starting carpark of the night run ) so I didn't see it in action. Was sitting on 33s I think..
yes holden v6, supra 5 speed, nissan t-case apprently he told scott and myself at the ascc practice run - said he wanted to get 37" MT/Rs for it
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
yes, about a 20 -30 degree side slope, and yes there is a big rock under the drivers side wheel, here is a better pic of the problem
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
#
Andy...........
All post's are submitted with the assistance of alcohol
"OUR FEROZA" is Debt Propelled
All post's are submitted with the assistance of alcohol
"OUR FEROZA" is Debt Propelled
Yep, I can attest to the "Driver Error" thing.
http://groups.msn.com/AussieDaihatsuRoc ... PhotoID=56
http://groups.msn.com/AussieDaihatsuRoc ... PhotoID=56
Mud makes excellent toothpaste.
Who is online
Users browsing this forum: No registered users and 1 guest