Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

why is my 80 sitting down on one side

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1101
Joined: Mon Feb 21, 2005 7:12 pm
Location: Gold Coast/Ormeau

why is my 80 sitting down on one side

Post by scottmcguinness172 »

hey all why the Fu*k is my 80 sitting down on one side its really annoying i have swapped the coils over on the front and back i had coil packers i took them out and its still sitting down on the passenger side itss soooo annoying i have lovells coils is it just lovells or what can anyone till me what can be done or how to messure it to figure out the problem is or something

cheers scott
Last edited by scottmcguinness172 on Thu Sep 28, 2006 8:34 pm, edited 1 time in total.
1992 Dual Cab 80 series cruiser Factory Turbo 35"mtz's 5" Lift, Rear Locker
Team Blue Dog Off Road
Top
Posts: 1240
Joined: Wed Apr 28, 2004 7:06 pm
Location: right behind you watching, waiting

Post by flynn »

hehe fat man lean....or turbo lean

my lux does it also

possibe reasons are: springs sagging, the fuel tank in on that side, drivers lean(fat man lean...because there is always a someone on the driverside its more likely to sag quicker...dont know if its true but hey) and also turbo lean...ur turbo is so fully sick and huge its weighing down the side of your car....

but yeah take ur pic......
Team Rock Solid -M.Flynn
rolux: Out of money and looking for sponsers

If there's a will, there's a four wheel drivers way.

http://www.outerlimits4x4.com/viewtopic.php?t=78397
Top
Posts: 1101
Joined: Mon Feb 21, 2005 7:12 pm
Location: Gold Coast/Ormeau

Post by scottmcguinness172 »

its the passenger side that leans down atleast 15mm its deffenatly noticable even when its got no fuel in it it does it
1992 Dual Cab 80 series cruiser Factory Turbo 35"mtz's 5" Lift, Rear Locker
Team Blue Dog Off Road
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

not sure if you knew this but arnt springs different on the drivers and passenger side? to compensate for the weight on each side.

TOM
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
Top
Posts: 1101
Joined: Mon Feb 21, 2005 7:12 pm
Location: Gold Coast/Ormeau

Post by scottmcguinness172 »

the rear ones are marked passenger and drivers side yes but the front ones arnt
1992 Dual Cab 80 series cruiser Factory Turbo 35"mtz's 5" Lift, Rear Locker
Team Blue Dog Off Road
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

you just swapped em over, therefore the sagged springs are now on the other side...

The drivers side ALWAYS sags out before the passenger side- due to fuel tanks, and you ALWAYS have a driver in the vehicle, you dont always have the passenger.

The drivers front leaf pack on a hilux is 10mm taller than the others for this reason.
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 1101
Joined: Mon Feb 21, 2005 7:12 pm
Location: Gold Coast/Ormeau

Post by scottmcguinness172 »

no matter what i so no matter what spring i swap its allways sagged on the same side its the 2nd time i have changed them over im thinking maybe the chassie could be bent or something my mate has the sme lift as me and his cruiser is sitting dead level i need to borough a set of coils to try but even if my car has sagged on the passenger side i put the other coil in the other side like swap them shouldnt it mean the other side should be lower? :bad-words:
1992 Dual Cab 80 series cruiser Factory Turbo 35"mtz's 5" Lift, Rear Locker
Team Blue Dog Off Road
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Buy somecoil spacers or make some ou of rubber...you may be pinched onthe rear spring tops...make sure they are sitting right.
Andrew
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

sounds like your chasis is twisted slightly take it to a panel beater who can check it for alignment. shouldn't be to much to straighten it. or just level it with coil spacers.
MUD, MUD, GLORIOUS MUD!
Top
Posts: 66
Joined: Thu Apr 15, 2004 11:30 am
Location: Northern Territory

80

Post by griff »

do you have extra/oversize battery on the d/side? Had this happen b4.
TD42 GQ Wagon
FJ75 Troopy
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

Daisy wrote:not sure if you knew this but arnt springs different on the drivers and passenger side? to compensate for the weight on each side.

TOM
The springs on LHS vehicle are also generally designer to take into account cross fall on roads aswell.... :D
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 79 guests