Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4wd Dyno's in Melbourne - recommendations?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

4wd Dyno's in Melbourne - recommendations?

Post by greg »

Hi All,

Just wonding about somewhere to get my car Dyno'd in Melbourne.

Now that we've completed most of the engine swap for the car, I'd kinda like to get it checked to see that it's running okay (air/fuel ratios etc).

Can anyone recommend somewhere that can cope with a "larger" car? (i.e is my tyre size going to make the car harder to get dyno'd?) Or are all Dyno places the same?

Any good / bad experiences to share would be great too.

Thanks,
Greg
DMA Founding Member #1 - Now Retired
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: 4wd Dyno's in Melbourne - recommendations?

Post by bogged »

Ask AWILL4x4 theres one in Carrum Downs next to his work, they install LPG Systems.

Nice bunch of dudes too, thats where i got my Long range tank for $150!

I can find out more if andrew dont come online.
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

Go see Mark or Paul at JPC !!!!!

or try NISPRO !!!!


both good joints , a both play with turbos !!!! :D
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Posts: 952
Joined: Mon Oct 21, 2002 8:49 am
Location: KILL - SCYTH

Post by 80diesel4play »

Try efi dynamics in Lilydale - Errol - 9735 4513

Fathillbilly will vouch for the bloke - they made his truck go whooooooooosh....
80 Series Turbo - the Toy car...
XR6 Turbo - the work car...
XW wagon - the dogs car...
Posts: 178
Joined: Mon Jun 02, 2003 3:21 pm
Location: Bayswater, VIC

Post by Aus4wd »

We dyno ours cars at NIZPRO in Bayswater, ask for Lee or Simon 9761 1522
Australian 4WD Specialist
www.aus4wdracing.com.au/forum
Posts: 733
Joined: Tue Jul 15, 2003 7:25 pm
Location: VIC working on my junk

Post by 308LUX »

i got my 308 dyno'd at Early bird Falcon. thomastown

Did a realy good job, gained 20 hp on a tune up.

and the dyno is quite new

speak to Damien 9462 2920.
Last edited by 308LUX on Wed Sep 10, 2003 4:07 pm, edited 1 time in total.
"The object of war is not to die for you country, but to make the other bastard die for his." - General George Patton
Posts: 435
Joined: Fri Jan 24, 2003 8:37 am
Location: Ferntree Gully, MELB

Post by LEXX »

Thanx for posting this thread Greg, you beat me too it. I've been meaning to to this to the Jeep for ages now, anyone know what sort of cost invovled in this excersize? And these guys listed I assume would handle 35's without a prob?
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

if you run your rig on 35,s
get it dynoed on 35,s !!!!

most of them will dyno with wat you have !!!!!

no recaps thou !!!!!!!! :? :roll:
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Posts: 435
Joined: Fri Jan 24, 2003 8:37 am
Location: Ferntree Gully, MELB

Post by LEXX »

moose wrote:if you run your rig on 35,s
get it dynoed on 35,s !!!!

most of them will dyno with wat you have !!!!!

no recaps thou !!!!!!!! :? :roll:


My thoughts exactly Moose, no way would I be dynoing it witout the 35's on there, just making sure that these guys can handle the tyre size, but I'm sure they can. Might have to make a few phone calls tomorrow.
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

I know NIZPRO do !!!!
certain JPC would as well ,
with Birdy & marks,s cars all running 35,s & bigger !!!!
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Thanks all, looks like some pretty solid feedback... Once i get my car on the road again i guess i'll book myself in to one of these places and find out how it's all going...

Any ideas about what it costs / how long it takes to do this process? 10mintues? 6 hours? Obviously i don't have any idea about what's involved.

Cheers,
Greg
DMA Founding Member #1 - Now Retired
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

apparently Birdy was saying in a mag, 17kw MORE WITHOUT the snorkel ram head on it, thats why he doesnt run it..

I find this hard to believe... 17kw More? or was that 1.7?
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

I think that thing is running on gas isn't it? I've heard that when running on gas with a snorkel you should face the top bit backwards because otherwise the rammed air mucks up the air/fuel mix.
I'm not 100% sure on that though...
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

I struggle to see what diff it could possibly make - unless the ram head restricts air flow... remember that we are talking on a dyno - so unless they are using a fan to blow air at the car (i.e. there is no wind so air isn't being forced into the system with the ram head) - i don't think the ram head could make any difference?
DMA Founding Member #1 - Now Retired
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

17kw is a phuckin lot of difference!! I'll try it! but have a feeling it will be disappointing
Posts: 130
Joined: Mon Jun 30, 2003 12:44 pm
Location: Melbourne

chassis dyno's

Post by davejb »

Auto Gas Connection
Carrum Downs 9775 1331
Give them a ring and talk to Michael, he's into high performance stuff and
brilliant with LPG
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Same here TuffRR, i've heard that exact same reason, but like you not 100% sure either

Guy i know that runs LPG in his rangie disconects his snorkels when using LPG, he is a mechanic too so there must be some affect????
Land Rover Discovery - GQ conversion underway
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Re: 4wd Dyno's in Melbourne - recommendations?

Post by CRUSHU »

bogged wrote:Ask AWILL4x4 theres one in Carrum Downs next to his work, they install LPG Systems.

Nice bunch of dudes too, thats where i got my Long range tank for $150!

I can find out more if andrew dont come online.

auto gas connection
michael or shane
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

oops :oops: beat me to it!!

MK AUTOMOTIVE in moorabbin is having a dyno day on 4 oct. $35 to run your car and maybe make a few suggestions. lots of big hp cars. 400kw 250 crossflow xf turbo :cool: . no swampers, but muddies ok, any size you want. 9553 2303
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: chassis dyno's

Post by bogged »

davejb wrote:Auto Gas Connection
Carrum Downs 9775 1331
Give them a ring and talk to Michael, he's into high performance stuff and
brilliant with LPG



That would be the one... He has a nice F100, old 60s model with a very large donk, very nice...
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: chassis dyno's

Post by bogged »

Does running on a Dyno root your tires?
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

if you run swampers or retreads, or super soft slicks etc, yes it can. swampers arent speed rated, and you can be doing around 150kmh on a dyno.
Posts: 263
Joined: Thu Mar 06, 2003 7:55 pm
Location: Bayswater

Post by Fathillbilly »

i think it also depends on what puter you are running.

ie if you are using a Mo-Tech talk to simon at nispro ( imo Mo-Tech are over rated ) etc

most guys can get more out the system they are used to playing with

Errol "efi dynamics in Lilydale - 9735 4513"

" AKA the wizard" is in to big HP :bad-words: :twisted: :D :D :D

he sets up a lot of the cars for Summer Nats and rice burners and that sort of thing. he also does complete turbos setups, norm asp and super charged setups.

he tuned my turbo IC 4.2 diesel patrol with 35's on it with out a problem, apart from getting to the fuel pump (to high) and he's 6'2"

there are a lot of good people out there its just a matter of calling around and asking, what type of motor they work on most and/or if they can recommend someone who has experience with your motor

Stu
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 3 guests