Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FRONT AIR LOCKER DOES NOT SEEM TO BE WORKING ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 273
Joined: Tue Aug 09, 2005 5:13 pm
Location: at church watching porn

FRONT AIR LOCKER DOES NOT SEEM TO BE WORKING ?

Post by frigga 40 »

ive got front and rear arb lockers the front is not spinning both wheels i have just had my cvs replaced and dont know what the problem could be?
any one had a problem like this and if so how did they fix it
watch out for www.mudundies.com.au its www.mudrhino.com.au's sister site
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

locker solenoid engaging?? hear a psssht sound when you engage/disengage the front locker?

is there an air leak in the line?

jack the front end off the ground and test it as u go along rather than on the track.

TOM
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

What sort of Vehicle?
Top
User avatar
DamTriton
God of Athiests
Posts: 8337
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Basic question, but did you assemble the hubs the right way, and are they definitely locked in?
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 273
Joined: Tue Aug 09, 2005 5:13 pm
Location: at church watching porn

Post by frigga 40 »

i didnt put them in they are in a gq swb was out the other day and went to use it and only had one wheel spinning
watch out for www.mudundies.com.au its www.mudrhino.com.au's sister site
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Who ever did youre cv`s has missed putting the ring back in in the hub. A Nissan person will know the bit I`m talking about and what its called but I think its just a spacer.
Top
Posts: 109
Joined: Sat Apr 22, 2006 4:35 pm
Location: Oz

Post by segan1 »

I had the same problem. It ended up being a faulty soleniod.

One other thing, most shops wire up the lockers so that the rear has to be engaged before the front will engage.
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Kinked airline from the solenoid to the locker will do that too, check the lines first.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

or hole in the airline from being too close to exhaust or other heat source
Ransom note = demand + collage
Top
Posts: 199
Joined: Tue Feb 21, 2006 12:21 pm
Location: Berwick, Victoria

Contact:
Contact QIKAZZ

Post by QIKAZZ »

Check everything everyone else has suggested first, if all of the above seem ok, then it could be the o-ring in the locker itself, mine done that, and was pushing the diff oil and air back out of the diff breather line, but in this case you know something is wrong because the air compressors runs constantly. (same as if there is a leak or hole in the air line)

Cheers

Azz
RC Hobbies - Online Store - http://www.qikazz.com.au
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests