Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

WHats the wheel stud thread size on a paj?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

WHats the wheel stud thread size on a paj?

Post by pongo »

I have some Factory mags i bought off here ages ago, and they have a square hole for the nuts instead of a taper.

I was hoping to find out if the paj nuts will fit on my Nissan, might save a few $$ and headaches chasing up some nuts.

Thanks


P.S. Or will tapered nuts holem on no probs. Its going to be pretty much an on road toorak tractor
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

You'll have to get square section nuts and washers. Don't think they're that expensive. I wouldn't use your old tapered nuts as they wont seat properly!
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

apparently there 12x 1.5 mm . same as toyota but not nissan. :bad-words: :roll:

thanks anywayz guys
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

FWIW, I had some Nissan (Skyline) alloys converted to tapered seat inserts so I could run tapered wheel nuts.

I don't remember the price, but it was cheaper than buying the required wheel nuts. Four or five years later, and they're still going strong. :)
Top
Posts: 2
Joined: Thu Oct 05, 2006 9:24 pm
Location: Tooradin, Vic. Aust.

Post by Yonnee »

pongo wrote:apparently there 12x 1.5 mm . same as toyota but not nissan. :bad-words: :roll:

thanks anywayz guys
You are correct. Paj's are 12mm x 1.5 same as Toyota. Nissan's 12mm x 1.25.

I can't tell you of a simple fix 'cause I don't know of any Nissans running that style of wheel nut. Be careful also of the diameter of the shank of the wheel nuts as this helps locate the wheel rim along with the centre boss of the hub.

Hope this helps,

Yonnee.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

Yonnee wrote:
pongo wrote:apparently there 12x 1.5 mm . same as toyota but not nissan. :bad-words: :roll:

thanks anywayz guys
You are correct. Paj's are 12mm x 1.5 same as Toyota. Nissan's 12mm x 1.25.

I can't tell you of a simple fix 'cause I don't know of any Nissans running that style of wheel nut. Be careful also of the diameter of the shank of the wheel nuts as this helps locate the wheel rim along with the centre boss of the hub.

Hope this helps,

Yonnee.

are you sure dude? now im :?

im sure i had the nuts from my paj on my pootrol and vice versa :?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

No way do nissan and Paj wheelnuts interchange
J Top
Top
Posts: 7
Joined: Sat Sep 23, 2006 12:05 pm
Location: Perth

Post by zooksport »

Nissan are 12 x 1.25, same as Suzuki.

Mag nuts should cost around 2.50 ea, with washer


.


.
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

yeah, I might just resell the rims on ebay, unless some one here wants them for what i paid

Cheers
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests