Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Afew queations for a 92' 4 Runner

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Eb
Posts: 2
Joined: Sat Jul 15, 2006 12:57 pm

Afew queations for a 92' 4 Runner

Post by Eb »

Not long ago i bought a 92' 4 runner, 2.8L Diesel with a 2" lift and 35" Baja mud claws, and i just wanted to ask afew questions about it.

it has a duel fuel tank, its 105L in total, and i havnt completely emptied it yet, so i dont know the fuel consumption, but it is not pretty, and compared to my brothers 2.8L diesel hilux ute, it has no balls what so ever. they are virtually the same car, with almost the same weight, but mine is much more sluggish. so i was thinking about getting a turbo put in it and was looking for some advice on what turbo, and a price range :?: i am sure if i get more power out of it i will use it, so fuel consumption will probably be worse.

i was also thinking about getting a service on the injectors, possibly getting them refurbished as it could improve fuel efficiency and reduce the smoke (its not heaps, but its more that other diesels that i have seen) and was also wondering if that was the right way to go, and then again, a possible price range :?:

any advice will be extremely appreciated :D :D

Thanks guys :!: :!:
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

Check your diff ratios you need 4.88 to run those tyres and I think the diesels are 4.11
That will solve your sluggish problem and smoke I am guessing that it is black which means she is labouring.

To check your ratios divide the number of teeth on your pinion gear by the number of teeth on your crown wheel crown wheel 39 teeth pinion gear 8
39/8=4.875
If you dont have panel damage you ain't trying hard enough
Posts: 443
Joined: Tue Jan 04, 2005 10:08 pm
Location: sydney

Post by mattsluxtruck »

A diesel 92 will have 4.3's i believe.
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

He will still need 4.88s and the practice of replacing the front diff.
As I am guessing it has'nt been SASed

The other thing that causes smoke on diesels is a carbon build up or glazing
If you dont have panel damage you ain't trying hard enough
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

Yep... change your diff ratios to 4.88's, you can pick them up from here every now and then for under $500 easily, and then get them installed (note, you cannot use a solid axle model in the front, as ths ring gear is 7.5', not 8')

How many km's has the motor got on it? 300+ and its probably getting a bit long in the tooth for a turbo (depends entirely upon service/life history of course) But you can get the turbo gear of a surf 2.4 and fit this on, should be able to pick it up for under $1k here or ebay, and then a tune by a workshop ~$500 In most cases a turbo should improve economy as you are using less accelerator and getting a better burn rate from the fuel, however the trackabout comp 79 series uses in the order of 21l/100km, but it is rather, rather worked (factory they use <11l/100) For a full supply/installation/tune by a workshop will be about $3k minimum if your not handy/happy on the tools.

Injectors - should be able to be rebuilt by a diesel workshop for ~$50 each, the labour component when i got mine was $360 R&R for all 4 IIRC.

Another thing to consider would be getting a pump rebuild, and timing belt changed.

I got pump/injectors/tappets done/timing belt done last november for $1500

Hope that helps...

Mudmacca - carbon build up and glazing can be fixed using good quality oil and a trip along the freeway @ 100km/hr for 20 mins or so :)
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

+dj_hansen+ wrote:Mudmacca - carbon build up and glazing can be fixed using good quality oil and a trip along the freeway @ 100km/hr for 20 mins or so :)
I used to have a sd25 and fixed that problem with penrite and power plus addidive the blue stuff all the truckies seem to use it and a lot of skippers
If you dont have panel damage you ain't trying hard enough
Eb
Posts: 2
Joined: Sat Jul 15, 2006 12:57 pm

Post by Eb »

hey guys,

as for the sluggishness, i am actually changing down to some hancook road tyres(i think they are stock 31" road tyres, so muuuuch smaller) once i run the tank out to check the difference in the fuel consumption, as unfortunatly i wont be able to go 4wding for a while because of uni, so i thought i would save the life of my mud tyres, and my fuel. so what would happen if i was to change the gear ratio, and then change back to the smaller road tyres ??

as for the turbo, the car has done 250,000, and i dont have the money as yet, but i am still thinking about it. i mean the car with these tyres on it has no power what so ever, once you get it to a speed, its fine, but getting it there is a problem.

however i am getting the in jectors serviced/ reconditioned, that one is on my list as it isnt to expenceive.

anymore advice will be greatly welcomed, thanks heaps guys,

Eb.
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

She would rev harder and quicker of the mark
If you dont have panel damage you ain't trying hard enough
Posts: 393
Joined: Mon Jun 27, 2005 5:57 pm
Location: Eagleby/ Brisbane

Re: Afew queations for a 92' 4 Runner

Post by 4x4xmore »

Eb wrote:Not long ago i bought a 92' 4 runner, 2.8L Diesel with a 2" lift and 35" Baja mud claws, and i just wanted to ask afew questions about it.

it has a duel fuel tank, its 105L in total, and i havnt completely emptied it yet, so i dont know the fuel consumption, but it is not pretty, and compared to my brothers 2.8L diesel hilux ute, it has no balls what so ever. they are virtually the same car, with almost the same weight, but mine is much more sluggish. so i was thinking about getting a turbo put in it and was looking for some advice on what turbo, and a price range :?: i am sure if i get more power out of it i will use it, so fuel consumption will probably be worse.

i was also thinking about getting a service on the injectors, possibly getting them refurbished as it could improve fuel efficiency and reduce the smoke (its not heaps, but its more that other diesels that i have seen) and was also wondering if that was the right way to go, and then again, a possible price range :?:

any advice will be extremely appreciated :D :D

Thanks guys :!: :!:
35's on a 4 runner with 2" lift, must be a tight squeeze?
89' feroza
2" sus lift
31x10.5x15 mudders



www.fishaholics.biz
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Re: Afew queations for a 92' 4 Runner

Post by mudmacaca »

4x4xmore wrote:35's on a 4 runner with 2" lift, must be a tight squeeze?
I fit them with a 3" body lift and could have used a 2". I only used a 3" cause I got it cheap.
If you dont have panel damage you ain't trying hard enough
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Re: Afew queations for a 92' 4 Runner

Post by 4sum4 »

mudmacaca wrote:
4x4xmore wrote:35's on a 4 runner with 2" lift, must be a tight squeeze?
I fit them with a 3" body lift and could have used a 2". I only used a 3" cause I got it cheap.
Yeah,and I`m fitting 38.5`s with neg 1" lift and 2" body lift :D :armsup:
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Posts: 393
Joined: Mon Jun 27, 2005 5:57 pm
Location: Eagleby/ Brisbane

Post by 4x4xmore »

ive got 3" sus and 2" body and 33's look like they just clear the inner guards on full lock, all on a surf.

mm 35's fit hey, (turns to wife)" just ducking down the shop babe, be back soon" :lol:
89' feroza
2" sus lift
31x10.5x15 mudders



www.fishaholics.biz
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests