Clicky, clicky
http://forum.ih8mud.com/showthread.php?t=96454
Yanks, is there anything they WONT do?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Interesting 80 series engine swap
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Interesting 80 series engine swap
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
The 4BT is a great engine, but a factory toyota TD 6cyl would probably run rings around it on-road. They need to do the conversions because they missed out on all the good factory diesels...
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
It's a common thing happening over there these days because the cummins engines are cheap and plenty, as are parts. toyota diesel motors alone are rare as, let alone parts.
I've also seen it done on a 60 series. the 4 inch lift (spring over on the 60) is necessary just to clear the sump, as they're a very tall motor.
I've also seen it done on a 60 series. the 4 inch lift (spring over on the 60) is necessary just to clear the sump, as they're a very tall motor.
Who is online
Users browsing this forum: No registered users and 8 guests