Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

R151 Slave Cylinder: Which side of bellhousing?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

R151 Slave Cylinder: Which side of bellhousing?

Post by sudso »

I need to know which side of the bellhousing the slave cylinder is on in the RJ70 Bundera that had the 4cyl. turbo deisel and the R151 gearbox.

I haven't got the box yet, mine has a fluffy G52 box at the moment but I want to put an old Holden 6cyl in it converted to run ULP so I want the stronger R151 box.

I can get a bellhousing kit to do it but they need to know which side the slave cyl. has to go on.

I was going to chev/auto the Bundy but I've decided to save that set up for a bigger 4wd. The old Holden 6 donk will have plenty of torque for a Bundy.

Cheers, sudso
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 145
Joined: Wed Jun 29, 2005 5:52 pm
Location: Newcastle

Post by smithie »

My R151F has the slave clinder on the LHS, but it is from a 1PZ, dunno if there are different versions out there.
If the Clutch fork pivot is mounted on the inside of the bellhousing (as is mine) then I'm not sure that it would matter would it?

Dan
Top
Posts: 233
Joined: Sat May 14, 2005 4:59 pm
Location: newcastle

Post by mico »

My R150f has the slave on the drivers side, it's in a v6 4Runner
if it ain't broke send it to me i'll fix it!
Top
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

Mine was on left had side (passanger side) of the gearbox. Yes was in a TD R151 bundy.
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

I.M.P.O.S.E wrote:Mine was on left had side (passanger side) of the gearbox. Yes was in a TD R151 bundy.
Thanks, will the R151 bolt straight up to the split style transfer, same as the G52?

I bought the Bundy with no motor or bellhousing, it still has the slave cylinder though and it goes on the passenger side too for the G52.

Just got to find meself an R151 box now in SA.

What other model yota's used this box? It would help me narrow down my search.

cheers, sudso
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 89
Joined: Fri Jul 15, 2005 9:01 am

Post by Bundy_Harry »

The R151 is a good choice for your Bundy, however it will not work correctly if you bolt it up to your existing transfer(g52).
The stub shaft on the transfer will need to be changed, essentially this means the transfer case needs to be pulled down and rebuilt. Your cheapest option would be to find a diesel bundy with gearbox and transfer and use that.

I will be reabuilding mine and taking advantage of some of the kits that Marks adapters supplies, better yet send the guys an email and see if they have some more info for you

cheers
Bundy_Harry
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 117 guests