Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Waterproof seat covers?
Waterproof seat covers?
I've installed some Suzuki x-90 seats in my ride along with a spray in bedliner...was looking to get some waterproof seatcovers.Now even though i have x-90 seats i think sidekick covers might work for me?anyone have ideas on where i might be able to find some seatcovers that would fit these seats snug?
father&son project "uki"
when done will have
31"tires
5"spoa
A/C
NEW SEATS
BUMPERS F/R
FOG LIGHTS
FULL ROLL CAGE
FOLD DOWN WINDSHIELD
POWER STEERING
when done will have
31"tires
5"spoa
A/C
NEW SEATS
BUMPERS F/R
FOG LIGHTS
FULL ROLL CAGE
FOLD DOWN WINDSHIELD
POWER STEERING
grimbo wrote:not sure where you are from but a couple of options would be Black Duck Canvas seat covers which are I think advertised in 4WD Monthly here in Oz or Wet Okele Neoprene seat covers (same stuff as wet suits0 advertised in the US mags
Yep, neoprene... now there's a genuine weight loss solution!!!!
I'd suggest something breathable, but then again it depends on whether your passengers enjoy the whole sweat thing.
I've read about some canvas materials that would actually be waterproof while still maintaining breathability a while back. If I find the website I'll shoot it through / post it... come to think of it, it might have been Black Duck Canvas...
Located in us/georgia...but yeah great ideas...i looked for black duck covers on the internet but was unsuccessful...i'll keep trying...thanks for thr help!
father&son project "uki"
when done will have
31"tires
5"spoa
A/C
NEW SEATS
BUMPERS F/R
FOG LIGHTS
FULL ROLL CAGE
FOLD DOWN WINDSHIELD
POWER STEERING
when done will have
31"tires
5"spoa
A/C
NEW SEATS
BUMPERS F/R
FOG LIGHTS
FULL ROLL CAGE
FOLD DOWN WINDSHIELD
POWER STEERING
i went to the web site...but the only US phone #i found was one digit short of complete...so i dialed it 10 times using a different #at the end each time...no luck
father&son project "uki"
when done will have
31"tires
5"spoa
A/C
NEW SEATS
BUMPERS F/R
FOG LIGHTS
FULL ROLL CAGE
FOLD DOWN WINDSHIELD
POWER STEERING
when done will have
31"tires
5"spoa
A/C
NEW SEATS
BUMPERS F/R
FOG LIGHTS
FULL ROLL CAGE
FOLD DOWN WINDSHIELD
POWER STEERING
try
The Canvas seat cover company
Mal Higlett
Ph 07 34230091
this was one of the search results that came up in my google search. haven't called the number so I dunno if it works.
also stupid question did you dial 0011 1 before their number?
The Canvas seat cover company
Mal Higlett
Ph 07 34230091
this was one of the search results that came up in my google search. haven't called the number so I dunno if it works.
also stupid question did you dial 0011 1 before their number?
Skippy
--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'
http://www.newflavour.com/
--------------------------------------------------
--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'
http://www.newflavour.com/
--------------------------------------------------
skippy wrote:try
The Canvas seat cover company
Mal Higlett
Ph 07 34230091
this was one of the search results that came up in my google search. haven't called the number so I dunno if it works.
also stupid question did you dial 0011 1 before their number?
I actually had the idea (could be wrong) that Uki was US-based... notice how the steering wheel's on the "wrong side" of the car in that shot of the seats?
Anyway, my searches have taken me elsewhere... hope it helps:
http://www.autoanything.com/seatcover (Aquatec is neoprene-based unfortunately)
http://www.carseatcovers.co.uk/ProductSeatCovFront.htm (main page: http://www.carseatcovers.co.uk/MainCarCare.shtml)
http://www.takla.co.za/prod01.htm
They may not fit as snug on the seats as you'd like though... you'll just have to see...
Personally I got 2 sets of high-back bucket seat covers for my soft-top Grand Vitara which I picked up for AU$15.00 (each pair) at KMart and although far from a perfect fit (actually, they fit better on the back seats than the front... might get the front ones "tightened"... anyone good with a sewing machine?), hey, it does it's job... not waterproof but I wouldn't like to leave it in the rain with the top down anyway, and if I'm going to be getting in the car with a wet wetsuit on, I just put a beach towel on the seat before sitting down... worked in the past... should work in the future.
Good luck with your search! And post photos when you've put them on!
Cheers,
Luis
thanks for all the help guys...i just got in here&i'll research those sites and definely post pictures of my covers when i get them...but first is first...got to install 2 sets of knuckle gaskets on my front axle tonight,while i have it apart...trying to solve any potencial problems before putting my rig all back together....few more things to do...repair axle...install front axle..install computer/1600 16v motor(got mine from a crashed x-90 only 8ooo miles on it)then its start it up time!oh yeah...will post pictures as i go
father&son project "uki"
when done will have
31"tires
5"spoa
A/C
NEW SEATS
BUMPERS F/R
FOG LIGHTS
FULL ROLL CAGE
FOLD DOWN WINDSHIELD
POWER STEERING
when done will have
31"tires
5"spoa
A/C
NEW SEATS
BUMPERS F/R
FOG LIGHTS
FULL ROLL CAGE
FOLD DOWN WINDSHIELD
POWER STEERING
uki wrote:thanks for all the help guys...i just got in here&i'll research those sites and definely post pictures of my covers when i get them...but first is first...got to install 2 sets of knuckle gaskets on my front axle tonight,while i have it apart...trying to solve any potencial problems before putting my rig all back together....few more things to do...repair axle...install front axle..install computer/1600 16v motor(got mine from a crashed x-90 only 8ooo miles on it)then its start it up time!oh yeah...will post pictures as i go
I've got the same engine on my GV... if you come up with any ideas for a slight power increase let me know your thoughts!
Cheers and good luck!
Luis
Who is online
Users browsing this forum: No registered users and 20 guests