Bolt On Sliders ?

Post by **CWBYUP** » Mon Oct 16, 2006 2:31 pm

Thinking about a set of bolt on sliders but not sure if they will strong enough. Its only a SWB Sierra so theres not that much weight there.

Has anyone else done this ? Has anyone got photos of how they attached them ?

Don't want to weld to chassis as a may change my mind on how there set up when I eventually build an EXO for it.

Info would be appreciated.

Cheers Nick

Post by **lay80n** » Mon Oct 16, 2006 2:38 pm

I had a set of bolt on sliders on my rocky (heavier by far than my seirra) and they held up fine to plenty of car landing on sliders on rocks type of abuse.

Layto....

Post by **Potter** » Mon Oct 16, 2006 2:44 pm

i have bolt on sliders on my GU wagon ill try and find some pics for you

Post by **ausyota** » Mon Oct 16, 2006 3:59 pm

Here is how I did mine.
Paul.

Post by **CWBYUP** » Mon Oct 16, 2006 4:00 pm

Yeah thnks heaps mate that would be great.

What size should I make it from ?

Nick

Post by **ausyota** » Mon Oct 16, 2006 4:06 pm

I made mine using 32NB pipe and 40mm Square
Paul.

Post by **Potter** » Mon Oct 16, 2006 4:38 pm

awesome looking slider Ausyota
here are mine

test fitting

Post by **CWBYUP** » Mon Oct 16, 2006 7:09 pm

ausyota wrote:I made mine using 32NB pipe and 40mm Square
Paul.

Hey sorry to be a pain but any possibility of a photo of how they attach ?

They look really good. I hope mine turn out that well.

Cheers Nick

Post by **CWBYUP** » Mon Oct 16, 2006 7:11 pm

ausyota wrote:I made mine using 32NB pipe and 40mm Square
Paul.

Hey mate sorry to be a pain but any chance of some photos of how they bolt up ?

They look sweet hope mine look that good.

Cheers Nick

Post by **ausyota** » Mon Oct 16, 2006 7:35 pm

CWBYUP wrote:
ausyota wrote:I made mine using 32NB pipe and 40mm Square
Paul.
Hey mate sorry to be a pain but any chance of some photos of how they bolt up ?

They look sweet hope mine look that good.

Cheers Nick

The outer 2 mounts sit flat against the bodymount bracket off the chassi and are drilled and bolted through that.
The centre mount slides up around the chassi with 2 bolts on the top above the chassi rail.

Just a point on the strength of bolt on sliders, the square RHS on mine runs directly under the sill for the full length so if the mounts flex it up the load is spread evenly along the whole sill preventing damage.

Thanks for the compliments guys.
have a look at my members thread on the zook for more.
http://www.outerlimits4x4.com/phpBB2/vi ... hp?t=68814
Cheers
Paul.

Post by **suzuki boy** » Mon Oct 16, 2006 8:38 pm

I made mine just with square tube with a 45 on the end and welden 2 bits to bolt onto the the 2 parts that come out from the chassis with the body mounts on them!

Was very easy to make and cost about $30.

Then painted them with chassis black.

Will try and post pics on the week end!

Website · Post by **suzukiboy** » Tue Oct 17, 2006 12:11 pm

Here is my set I made for the Vit.

Outer Limits 4x4 Board

Bolt On Sliders ?

Bolt On Sliders ?

Who is online