Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3.0 TDi exhaust and suspension upgrades

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
g@z
Posts: 107
Joined: Tue Jan 24, 2006 9:46 pm
Location: Yes

3.0 TDi exhaust and suspension upgrades

Post by g@z »

Got a GU III. Is an exhaust upgrade worth it? ie, make it a bit easier to drive lower in the rev range or is a chip the only way to boost low end performance?

Also, what's a good suspension upgrade? Mainly day to day driving, maybe an inch higher. I get the feeling that when the thing hits a reasonable bump, the suspension seems to oscilate a bit instead of just soaking it up.

Regards,
g@z.
Posts: 83
Joined: Tue Aug 23, 2005 11:26 pm

Post by jimsaq »

I got a dpchip and an exhaust after reading people on forums say it fixes the low end gutless problem - it didn't. It definitely improved things otherwise though, but it still sucks until the turbo is working.

If you only want an inch or so suspension, I'd take it to ARB for their standard OME upgrade
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

jimsaq wrote:I got a dpchip and an exhaust after reading people on forums say it fixes the low end gutless problem - it didn't.
maybe the DPchip is not as good as the Dtronic? Everyone swears by them..

so the handgrenade has no low end power.... 4cyl donk, large car, cant expect miracles...
Posts: 197
Joined: Tue Jan 04, 2005 9:52 am
Location: Brisbane

Post by patrolmad »

Don't complain, you could be worse off with an old TD42 boat anchor.
Patrolmad
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

patrolmad wrote:Don't complain, you could be worse off with an old TD42 boat anchor thats still going strong 600,000klms later with no issues..
I agree
g@z
Posts: 107
Joined: Tue Jan 24, 2006 9:46 pm
Location: Yes

Post by g@z »

Thanks for the replies.

I see the other diesel makes out there are getting more power and torque with the same or less capacity, so it's not unrealistic to say it's a good combination of size and power for the truck. Just a bit lacking down low.


Regards,
g@z.
Posts: 197
Joined: Tue Jan 04, 2005 9:52 am
Location: Brisbane

Post by patrolmad »

bogged wrote:
patrolmad wrote:Don't complain, you could be worse off with an old TD42 boat anchor
I agree
For once we agree on something bogged!!!
Patrolmad
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

patrolmad wrote:
bogged wrote:
patrolmad wrote:Don't complain, you could be worse off with an old TD42 boat anchor thats still going strong 600,000klms later with no issues..
I agree
For once we agree on something bogged!!!
Yup, I doubt that 1 3.0 GU will ever see them klms.. Well, on the back of a towy on the way to nissan for engine rebuild, or turbo rebuild, or new air con pulleys, or gearbox... or........
Posts: 197
Joined: Tue Jan 04, 2005 9:52 am
Location: Brisbane

Post by patrolmad »

Only time will tell.
My series III 3.0 has just ticked over 397,000kms and is still untouched apart from a clutch.....touch wood!!!
When it gets to 600,000 kms in 2 years time, I'll let you know.
Patrolmad
g@z
Posts: 107
Joined: Tue Jan 24, 2006 9:46 pm
Location: Yes

Post by g@z »

Um, back on topic please? I don't want t to become another 3.0 bashing thread.

Maybe some theory? Is a larger exhaust a good thing? ie, less stress on the engine? or does the increased flow (if any) mean turbo spins up a bit faster and actually pust more stress on the engine?

Has anyone in Melb ever fitter an EGT probe? If so who did it?

Regards,
g@z.
Last edited by g@z on Wed Oct 18, 2006 11:36 am, edited 1 time in total.
Posts: 197
Joined: Tue Jan 04, 2005 9:52 am
Location: Brisbane

Post by patrolmad »

Sorry g@z.

I have often thought about fitting a larger exhaust to my 3.0 but having spent countless $$$$ on exhaust upgrades on 4.2 petrol and diesel Patrols over the years for little or no benefit have refrained from doing so. The major benefit IMO of fitting a larger diameter pipe is that they generally sound better with the right muffler and therefore you think they are going better!!!!
Patrolmad
g@z
Posts: 107
Joined: Tue Jan 24, 2006 9:46 pm
Location: Yes

Post by g@z »

yeah, I put off putting headers on my L28 for years, but it did make a difference to the thing when I did.

However I've never had a turbo engine, let alone a diesel one, but one of the first mods people do to turbo engines is an exhaust. I'm just not sure if it's worth it and want to hear from people that have. I think Roly did from the 4x4 yahoo group, but that was ages ago. I hear 'get a chip'... 'nah, get exhaust'.

I think I'll get an EGT probe fitted. Then I'll get a consult interface and do some logging. Then I'll get an exhaust with a pre and post dyno.

I think I'll also add one of those intercooler fans that kicks in at low speed and log the data on that. That way I can preesnt some data on the mods so that anyone else can see what works and what doesn't. :)

Regards,
g@z.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

g@z wrote:I think I'll get an EGT probe fitted. .
You can fit them yourself, we did my GQ and mates in a weekend. Fairly easy.

Blokes down at Auto Gas Convesions in Carrum Downs Dyno'ed a Diesel GU the other week for a dyno run that had a bigger zaust put on, with no other pump mods and only gained 10kw.

Awill4x4 maybe able to rememebr which donk it was, I'm gettin mine dynoed before and after each mod by Shane down there so I can see what does what increase or decrease.
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

thats acutally a really good idea g@z...

I wanted to fit boost and EGT gauge before i made any mods (such as exhaust, chip etc)
But i ended up just going and getting the exhaust done. Couldn't be stuffed waiting/screwing around.
Um, back on topic please? I don't want t to become another 3.0 bashing thread.
with bogged online? :lol: It's a bit inevitable.

Maybe try the forums at patrol4x4.com mate. People seem to be a little bit less "anti-3.0L bandwagon" there... ;)
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

DEEV8 wrote:with bogged online? :lol: It's a bit inevitable.
Vice President of the Hate Handgrenade Patrol Club.
Posts: 197
Joined: Tue Jan 04, 2005 9:52 am
Location: Brisbane

Post by patrolmad »

DEEV8 wrote:thats acutally a really good idea g@z...
Maybe try the forums at patrol4x4.com mate. People seem to be a little bit less "anti-3.0L bandwagon" there... ;)
That's probably because they have experienced first hand that not all ZD30's are lemons unlike others on this thread and are prepared to move with the times and appreciate the benefits of a little technology.
Patrolmad
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

Bogged is from the stone age and will not think past the old fork lift engines
of the past.
GQ with big nuts
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

bogged wrote:
DEEV8 wrote:with bogged online? :lol: It's a bit inevitable.
Vice President of the Hate Handgrenade Hype "heard from a mate of a mate" Bandwagon Patrol Club.
I agree.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

stool wrote:Bogged is from the stone age and will not think past the old fork lift engines
of the past.
Coming from a RD28 owner :rofl: :rofl: :rofl:


DEEV8 wrote:
bogged wrote:
DEEV8 wrote:with bogged online? :lol: It's a bit inevitable.
Vice President of the Hate Handgrenade Hype "heard from a mate of a mate" Bandwagon Patrol Club.
I agree.
call it hype if you will
Image
g@z
Posts: 107
Joined: Tue Jan 24, 2006 9:46 pm
Location: Yes

Post by g@z »

Please knock it off will yas? :bad-words:

I had a look at some of the posts at the other site. Talk of blocking EGR vavles.

I had a chat to a bloke called Ray someone in Thomastown. Said that he thinks some of the failures he's seen have been related to the EGR valve somehow. Not 100% sure what he meant but he seemed to think that the early models EGR valve fell to bits, or got damaged and was not controlled by the ECU properly.

He seemed to believe that a tunable chip was the best option to get more out of it, and that only a unichip could be tuned to correct issues with the EGR valve. ie, reduce it's operation so that it does not open as much or flutter (I think that's what he was trying to imply about it's operation) and destroy itself and then get sucked up into the engine, or fail open and let in too much exhaust.

Also seemed to think that the series III was fixed or much better in this regard.

Can anyone add any more to this that's not 3l bashing?

Regards,
g@z.
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

how big is your exhaust ? if it is factory i would go a 3 inch mandrel bent exhaust at the minimun . be a little careful when putting a chip on a motor as if it can be used to void your warranty in any way it will be. And with a zd30 you need every bit of warranty you have.
Posts: 83
Joined: Tue Aug 23, 2005 11:26 pm

Post by jimsaq »

bogged wrote:so the handgrenade has no low end power.... 4cyl donk, large car, cant expect miracles...
try to comprehend the flow of a conversation mate :) nobody has said anything to indicate they are expecting miracles. I simply said that some people claim chip/exhaust fixes the issue, but I didn't find that to be true myself.

g@z: you can fix the issue for low range driving by fitting low range reduction gearing, but I suspect in highrange your only really noticeable options will be to run small tyres, maybe get lower diff or some super custom 1st gear :)

I stuck marks adapters 85% reduction gears in mine and the gutless low end issue is non-existant even with 36" rubber, here's a bit of an example http://www.youtube.com/watch?v=KmWFAYRzmww
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests