Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FITTING 2F INTO HILUX

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 75
Joined: Thu Jul 14, 2005 6:32 pm
Location: Where ever the mud is!....in townsville.

FITTING 2F INTO HILUX

Post by Outer Limits Hilux »

g'day

i have bought myself an ol' cruiza for $150. shes got a 2f, with extractors, 2 and a half inch straight through and a 350 holley. she goes hardcore but the g/box grinds like a bitch and the body got serious cancer.

because the motors in good condish, i was thinkin of putting it in my 84 lux. has anyone done it before, should i need another g/box, please help, all opinions will be considered

cheers, scotty
Wanted.... 4.88 or 4.56 front GQ diff center. Also wanted... GQ rear diff complete.
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

fibreglass panels and a cheap gearbox champ!!!!!! keep the 40!!
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

is it a 40 or a 60

i dont think the 2F will fit in there, its a pretty long motor.
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

The 2F will require chopping the G/ box tunnel out of the floor pan to fit the cruiser g/box and transfer in it. The firewall will need to be cut to allow the engine to protrude into the cabin. you need to cut out the radiator support and make a new one to accomodate a larger radiator. Custom Drive shafts will need to be made not to mention exhaust, wiring and all the other incidentals. I've seen this mod done on a mud racer.
If you are mechanically minded and have some engineering skills then it would take a couple of weeks solid work and a couple of grand. If your gunna pay someone to do it it'll cost around ten grand.

Fix the 40 mate!
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest