Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tyre prssures for 31" tyres?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 25
Joined: Sat Sep 02, 2006 9:57 pm
Location: Eastern Subuurbs of Melbourne via England

Tyre prssures for 31" tyres?

Post by Animal Mother »

I am running 31x10.5x15 bfg muddies. Should I run standard pressures for road use? I.e. 28psi front and 35psi rear?
Top
DL
Posts: 299
Joined: Wed May 31, 2006 8:33 pm
Location: Bellarine, Brackistan

Post by DL »

I've run 32 psi front and rear for years on the road with 31's and have got very even wear out of the tyres. Has a Chev in front though.

DL
Top
Posts: 172
Joined: Thu Nov 25, 2004 11:21 am
Location: Gold Coast

Post by Mick G »

I run 32" BFG muds on my D2 at 38 psi all round (as recommended by a tyre fitter) very even wear and good road handling. I used to run all 4 at 30psi (as recommended by someone else) but strangely enough the suspension works better and the comfort level increased when I put them all to 38psi.

Try a few different pressures as it all comes down to how you drive, how you want the car to handle and what suspension you run.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests