Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

EGT Temps

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 97
Joined: Mon Aug 28, 2006 9:05 pm
Location: scurvey bay

EGT Temps

Post by sld86 »

Ive just installed a egt guage on my 4.2d with an aftermarket turbo and runs 16psi. On the highway the egt sits between 250-300 depending on hills etc, when ive been doing hill climbs and stuffing around it gets up towards the 500 mark when making it work is this an average sort of temp to expect or not
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

My Safari Turbo sits around the same temp as yours--on a long uphill with lots of hard acceleration, it can get up to 550 deg, but comes down fairly quickly when you back off accelerator.

Nick
g@z
Posts: 107
Joined: Tue Jan 24, 2006 9:46 pm
Location: Yes

Post by g@z »

Is that pre or post turbo? Where did you get it fitted and how much was it, if you don't mind me asking?

Regards,
g@z.
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

post turbo 550deg is a safe limit, heard of it getting up to 700deg in some big modified comp rigs but your in piston melting terrtory there
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

oozuk wrote:post turbo 550deg is a safe limit, heard of it getting up to 700deg in some big modified comp rigs but your in piston melting terrtory there
A mates high HP diesel GU. Struggles to get 500 now. And thats with lots of boost and modded fuel pump.
but with just the boost wound up and abit more fuel with the factory sittings and used to get high.
THOUGHT FOR THE DAY....
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

turps wrote:
oozuk wrote:post turbo 550deg is a safe limit, heard of it getting up to 700deg in some big modified comp rigs but your in piston melting terrtory there
A mates high HP diesel GU. Struggles to get 500 now. And thats with lots of boost and modded fuel pump.
but with just the boost wound up and abit more fuel with the factory sittings and used to get high.
Turbo hi-flowed to drop the temps? What did he do
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

bogged wrote:
turps wrote:
oozuk wrote:post turbo 550deg is a safe limit, heard of it getting up to 700deg in some big modified comp rigs but your in piston melting terrtory there
A mates high HP diesel GU. Struggles to get 500 now. And thats with lots of boost and modded fuel pump.
but with just the boost wound up and abit more fuel with the factory sittings and used to get high.
Turbo hi-flowed to drop the temps? What did he do
Sold it to me and fitted A really cool turbo intercooler system. Running 26psi boost and lots of fuel.
I planned on hiflowing it and with the 3" dump. Running a full 3" exhuast. So supposedly produces good power. With out to much noise and has low EGT. Add an intercooler and things will be better again.
THOUGHT FOR THE DAY....
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

turps wrote:Sold it to me and fitted A really cool turbo intercooler system. Running 26psi boost and lots of fuel.
so a complete custom turbo/IC setup?

I planned on hiflowing it and with the 3" dump. Running a full 3" exhuast.
thats my plan.

So supposedly produces good power. With out to much noise and has low EGT. Add an intercooler and things will be better again.
Low EGT is what Im after, good power a bonus.. :D
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

g@z wrote:Is that pre or post turbo? Where did you get it fitted and how much was it, if you don't mind me asking?

Regards,
g@z.
Temperature after turbo--probe in dump pipe. $4100 drive in/out fitted by ARB Northern. Very happy with install and goes like the clappas ;)

Nick
Posts: 97
Joined: Mon Aug 28, 2006 9:05 pm
Location: scurvey bay

Post by sld86 »

cost me about $380 i think fitted to the dump pipe just got a standard vdo guage nothin flash tells me what i want to know, how much would temps drop fitting an i/c
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

bogged wrote:
turps wrote:Sold it to me and fitted A really cool turbo intercooler system. Running 26psi boost and lots of fuel.
so a complete custom turbo/IC setup?

I planned on hiflowing it and with the 3" dump. Running a full 3" exhuast.
thats my plan.

So supposedly produces good power. With out to much noise and has low EGT. Add an intercooler and things will be better again.
Low EGT is what Im after, good power a bonus.. :D
Yer Sparky has a thread on here somewhere. Not sure if the pics are still there. But his system is custom, using I think a safari manifold. Intercooler was built for a skyline. But is a hi-end kit, think it was a HKS kit.
As for what I am going to do with the GU factory turbo kit. mmm Not sure if I am going to use it now after driving sparkys ute. As there is alot of dollars in his.
But if I keep the GU system. I will hiflow it. Juzza will be the mechanic, dont know where he sends them to get done though. Other than that I would put an intercooler and eventually do the pump mods..
Even with out the intercooler and pump mods this should be able to get low EGT and good power.

But its all up in the air at the moment. As I am still driving a Petrol/gas shorty. That I gotta sell first.

As for where to put the EGT probe. A hole was drilled and tapped just before the turbo on the factory exhuast manifold.
THOUGHT FOR THE DAY....
g@z
Posts: 107
Joined: Tue Jan 24, 2006 9:46 pm
Location: Yes

Post by g@z »

I'm looking for a place in Melb (Knox area) that can install an EGT meter pre turbo, and maybe a boost guage.

I called the only turbo place that I know of that is close by and has a good reputation (Nizpro) but as it was a diesel, they had a chuckle and seemed to think I should be going to a diesel place. I lost respect in them instantly. You might have to use a different temp probe, but I didn't think the ability to drill and tap a hole in a manifold was so far out of their ability as soon as you changed the type of the exhaust gas on the inside!

Oh well, their reputation tarnished, not mine.

Regards,
g@z.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

AG Diesel westall road?
Posts: 30
Joined: Fri Aug 18, 2006 3:08 pm
Location: Geelong, Vic

Post by Rem 22250 »

As bogged said AG Diesel or AXT
No Hurry
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

What about Diesel Tec in Lilydale, not too far from Knox.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
User avatar
ACH
Posts: 49
Joined: Wed Apr 14, 2004 2:54 pm
Location: WA

Re: EGT Temps

Post by ACH »

sld86 wrote:Ive just installed a egt guage on my 4.2d with an aftermarket turbo and runs 16psi. On the highway the egt sits between 250-300 depending on hills etc, when ive been doing hill climbs and stuffing around it gets up towards the 500 mark when making it work is this an average sort of temp to expect or not
Am I rite in guessing you've had the pump tuned? My unmodded TD42T (no i/c) is currently running 10psi and shows 200-300 deg C in "normal" driving. Throw the 1.9t van on the back and add another 100-150 deg to the reading. Post turbo courtesy of BE dump pipe (3" exh.).
Quote:
So supposedly produces good power. With out to much noise and has low EGT. Add an intercooler and things will be better again.

Low EGT is what Im after, good power a bonus..
So what are you showing now Bruce?
Cheers
Andy

[color=red]Pardon????? [/color]

[b]'02 TD42T thing with other things[/b]
Posts: 49
Joined: Wed Oct 25, 2006 10:57 pm
Location: Melbourne, east suburbs

Tecnician

Post by workmonday »

Diesel Tech (Andrew and Matt) in Lilydale do my stuff. Good Blokes and got a Dyno now...
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests