ANYONE WHO HAS TRYED THIS?? OR IS IT JUST LIKE SHIT HEHE
www.hicloneqld.com/products.html
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hiclone
search is your freind, the ONLY freind you'll have on that question
Theres a little demonstration device sitting on shelf at the engine rebuilder that I went to recently, which is a fan in the bottom of a plastic tube.
When you turn it on, a little plastic "X" with straight blades up in the middle of the tube stays perfectly still.
When they drop the hiclone in the top of the tube, it makes that little plastic "X" spin rapidly in the airflow.
It's supposed to prove how well the hiclone makes the airflow mix and blend.
But what is so funny about this device, is there was no hiclone nearby, so while playing with it I turned it on, and put my hand over the top of the tube and that also made the turbine spin.
So if you just want the air in the tube to swirl you can get the same result by completely blocking the tube with your hand
I pointed that out to the guy when he brought a hiclone over to demonstrate, and told him that maybe all the hiclone is doing is blocking the airflow because it has the same result.
I've been in other forums where this has been discussed ad infinitum, it usually comes down to the following:
Those who haven't used them lambasting them.
Those who have used them swearing by them,
The odd person in between who has tried them and found they didn't work, then being told off by those who support them, for not installing them correctly or using two few of them, or putting them in the wrong places, etc etc etc
I personally got told for my car I need two or even THREE of them.
One in the snorkel, one before (or was it after) the turbo, and one some other place.
I don't think a firm answer ever really gets resolved.
When you turn it on, a little plastic "X" with straight blades up in the middle of the tube stays perfectly still.
When they drop the hiclone in the top of the tube, it makes that little plastic "X" spin rapidly in the airflow.
It's supposed to prove how well the hiclone makes the airflow mix and blend.
But what is so funny about this device, is there was no hiclone nearby, so while playing with it I turned it on, and put my hand over the top of the tube and that also made the turbine spin.
So if you just want the air in the tube to swirl you can get the same result by completely blocking the tube with your hand
I pointed that out to the guy when he brought a hiclone over to demonstrate, and told him that maybe all the hiclone is doing is blocking the airflow because it has the same result.
I've been in other forums where this has been discussed ad infinitum, it usually comes down to the following:
Those who haven't used them lambasting them.
Those who have used them swearing by them,
The odd person in between who has tried them and found they didn't work, then being told off by those who support them, for not installing them correctly or using two few of them, or putting them in the wrong places, etc etc etc
I personally got told for my car I need two or even THREE of them.
One in the snorkel, one before (or was it after) the turbo, and one some other place.
I don't think a firm answer ever really gets resolved.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
imagine fitting them inside your snorkel right through to your inlet manifold at intervals of 3-4".................this would give you a turbo effect right..............I mean with 35-40 of these suckers fitted as I have just described you would be running about 6-7psi without the related heat of a turbo and you would be getting about 1100km/tank out of a TD42..................pppfffttt................... .....that's it I'm gunna buy shares in this company.
Cheers
Linc
[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Linc
[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Yeah, i've done this. just joined 50-odd hiclones together and wrapped 'em in duct tape to create a snorkel. They worked so well, i used another 150 back-to-front as an exhaust pipe to help get rid of exhaust gases quicker. 7psi + 7psi, mate she hammersBIG GQ wrote:imagine fitting them inside your snorkel right through to your inlet manifold at intervals of 3-4".................this would give you a turbo effect right..............I mean with 35-40 of these suckers fitted as I have just described you would be running about 6-7psi without the related heat of a turbo and you would be getting about 1100km/tank out of a TD42..................pppfffttt................... .....that's it I'm gunna buy shares in this company.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
I got sent a sample hyclone type device by one of my suppliers, fitted it to my 4.5 patrol (duel fuel). It did actually work, apparently i put it in the wrong spot, but it did add on 8-10% in Km per tank.
It was free, so it was worth a try.
Used to fit the Hiclones to single point injected Chev's with a carby style air box on top of the engine, they also worked. Can't recall the figures off the top of my head, that was a while ago.
It was free, so it was worth a try.
Used to fit the Hiclones to single point injected Chev's with a carby style air box on top of the engine, they also worked. Can't recall the figures off the top of my head, that was a while ago.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
I guess I'd fit into the odd category then.Ezookiel wrote:...this has been discussed ad nauseum, it usually comes down to the following:
Those who haven't used them lambasting them.
Those who have used them swearing by them,
The odd person in between who has tried them and found they didn't work, then being told off by those who support them....
At one stage I had four of them, testing for a mate who was selling and fitting them.
Two in my V8 Leyland Terrier truck ... No difference
One and Two in SWMBO's 3.2 Navara ... No difference
One in Dad's Hyundai ... slight increase in fuel consumption.
Apparently the trick is to Dyno test before fitting, then tune up after fitting and dyno again. Viola! 5 hp improvement at the wheels! Of course it's the tune up that gives you the power, not the ... device. Take it out again and those horses are still there.
hi-clone
My GQ petrol has a hi-clone of sorts in it standard. The round air box fitted straight after the tube comming out of the inner guard has one in it. This box is like a pre air cleaner as it sorts the large particles out of the air flow.
I ought to report you to the f#cking RSPCA neville.
Yeah, one of the Toyo's came with a similar device standard.
A friend working on a property where the toyo was long dead, pulled it out and put it in his 60 series. He thought there was an improvement but it was pretty subjective.
Just cause I was told I needed two or three of them doesn't mean I bought any. But 12 of them at $100 each. Well how can I refuse
How do you equate spinning the air with increasing it's psi?
I can't see how it equates to a turbo because spinning the air doesn't increase it's pressure.
A friend working on a property where the toyo was long dead, pulled it out and put it in his 60 series. He thought there was an improvement but it was pretty subjective.
Just cause I was told I needed two or three of them doesn't mean I bought any. But 12 of them at $100 each. Well how can I refuse
How do you equate spinning the air with increasing it's psi?
I can't see how it equates to a turbo because spinning the air doesn't increase it's pressure.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
mq's also have something similar in there airbox too.
i think on some cars they work but on alot of newer tech cars they dont do a hell of alot.
back on the day not alot of thought was put into howair got in and out of motors, they seem to care a little more now and design inlet plumbing with econamy and performance in mind
i think on some cars they work but on alot of newer tech cars they dont do a hell of alot.
back on the day not alot of thought was put into howair got in and out of motors, they seem to care a little more now and design inlet plumbing with econamy and performance in mind
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
I'll leave this for somebody else to have fun with.Ezookiel wrote: How do you equate spinning the air with increasing it's psi?
I can't see how it equates to a turbo because spinning the air doesn't increase it's pressure.
Are you sure you didn't buy any
Cheers
Linc
[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Linc
[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
thats basicly the idea. was started years ago. people used to make em to fix fuel/air mix problems with carby motors exspecialy ones with log type manifolds or v8 mnifolds that have tend to lean out the mix on certain cylinders. however these days manifolds are designed, the swirl is made by head design and the fuel is injected.MyGQ wrote:Hiclones are supposed to help mix the air/fuel right?
If thats the case would make sweet FA of different to a diesel that injects its fule straignt into the combustion chamber.
the only reason a hiclone would work if there is something wrong with the motor !
a lot do. however its for seperateing dirt and quietening down the air intake noise.My GQ petrol has a hi-clone of sorts in it standard. The round air box fitted straight after the tube comming out of the inner guard has one in it. This box is like a pre air cleaner as it sorts the large particles out of the air flow.
Nope, I didn't buy any.
I only get suckered on normal everyday stuff, like having my recent order of bonnet scoops stolen by an Aussie Post worker, or someone selling car seats and forgetting to mention that one of them doesn't actually work.
I rarely fall for gimmicks.
I only get suckered on normal everyday stuff, like having my recent order of bonnet scoops stolen by an Aussie Post worker, or someone selling car seats and forgetting to mention that one of them doesn't actually work.
I rarely fall for gimmicks.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Who is online
Users browsing this forum: No registered users and 0 guests