183 @ the wheels. Did you end up going coil pack ignition?
oh yeah, can you Tonka the pics?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Pics of my Rangie Tray
Moderator: Micka
Sounds good!!cloughy wrote:Nobody caresbut it was back on the dyno again for another tune, 183bhp and its a crapload smoother to drive, got to get another trip in before the navnite but
but not bad considering a stock 3.5 on the same dyno is 60bhp
183 is damn nice!!
Any recent pics of the truck?? Last pics i have seen it was still unfinished.
'86 Hiline, 3.9L, R380, Q78's, F&R Maxi's, Warn 8274
I'll get some pics this week, anyone want to host them and all that stuff, all the ones i had attached have been deleted
Nah haven't gone coil pack, that was only to fit an eaton supercharger cause the dizzy is in the way, but i think its more hassle than what its worth, may still look into a centrifigal pump, or up the comp to 10:1 or maybe leave it alone, not sure yet
Nah haven't gone coil pack, that was only to fit an eaton supercharger cause the dizzy is in the way, but i think its more hassle than what its worth, may still look into a centrifigal pump, or up the comp to 10:1 or maybe leave it alone, not sure yet
Wanted: Car trailer or beaver tail truck, let me know what you got
cloughy wrote:I'll get some pics this week, anyone want to host them and all that stuff, all the ones i had attached have been deleted
http://www.photobucket.com
signup is free and easy to host pics.
haha, thats 2 posts in nearly as many days that i've reccommended Photobucket, gotta be commission in it i reckon.
'86 Hiline, 3.9L, R380, Q78's, F&R Maxi's, Warn 8274
Cool Rig
Thats a nice job there dude.
Tell me, i'm doing a few missions myself on a Rangie but i need to buy a welder. It would be nice to be able to take it away with me something you can't do with a mig, tig or stick.
I can get a nice tig for about $580
Don't know yet about migs and stick, well you get that with a or this tig i'm looking at.
However there is a mob in melbourne who sell a product called DHC 2000 Welder formely called Henrob 2000 which is based on the gas welding principle but their asking $699.00 for a hand piece and some nozzles, damb dear I think. Yet, it has a good write up.
What have you used on your mods, looks like some nice welding there.
This is what this gas welder is supposed to do and would be quite mobile.
1. Weld and repair Aluminium, Cast Iron and
Stainless steel to TIG strength.
2. Weld car panels & up to 1/2" thick steel with
minimum distortion
3. Save at least half the cost of gas and filler rods
4. Do the work of a $5000 plus 3 Phase TIG Welder at a fraction of the price
5. Cut up to 1" thick steel like plasma cutter.
Would be nice to have something realy versatile.
Tell me, i'm doing a few missions myself on a Rangie but i need to buy a welder. It would be nice to be able to take it away with me something you can't do with a mig, tig or stick.
I can get a nice tig for about $580
Don't know yet about migs and stick, well you get that with a or this tig i'm looking at.
However there is a mob in melbourne who sell a product called DHC 2000 Welder formely called Henrob 2000 which is based on the gas welding principle but their asking $699.00 for a hand piece and some nozzles, damb dear I think. Yet, it has a good write up.
What have you used on your mods, looks like some nice welding there.
This is what this gas welder is supposed to do and would be quite mobile.
1. Weld and repair Aluminium, Cast Iron and
Stainless steel to TIG strength.
2. Weld car panels & up to 1/2" thick steel with
minimum distortion
3. Save at least half the cost of gas and filler rods
4. Do the work of a $5000 plus 3 Phase TIG Welder at a fraction of the price
5. Cut up to 1" thick steel like plasma cutter.
Would be nice to have something realy versatile.
Re: Cool Rig
yes you can you just need a generator to run it off!!jackal1 wrote: It would be nice to be able to take it away with me something you can't do with a mig, tig or stick.
Welders
evanstaniland thanks for the reply.
I heard somewhere depending on the generator $$$$$$$ that the smaller once or cheap once have too much voltage fluctuation or something.
Beside welder and Generator ? $$$$$$$$$$, less to spend on my toy.
I heard somewhere depending on the generator $$$$$$$ that the smaller once or cheap once have too much voltage fluctuation or something.
Beside welder and Generator ? $$$$$$$$$$, less to spend on my toy.
Re: Welders
thats true, i know that the bigger comp fellas NEED them at comps such as WeRock and im sure it would come in handy if its at other comps, wouldnt bother bringing unless i had a base camp and tw rig!! But when your competing like the buggies you need to budget the price of the generator and welder into the overall cost!!jackal1 wrote:evanstaniland thanks for the reply.
I heard somewhere depending on the generator $$$$$$$ that the smaller once or cheap once have too much voltage fluctuation or something.
Beside welder and Generator ? $$$$$$$$$$, less to spend on my toy.
auto to lt95
I have lt95 / C4 P76 Combo in RR Ute 4door single cab very interested in
info on ritters C4/LT95 conversion
I would buy one if want to part with them
info on ritters C4/LT95 conversion
I would buy one if want to part with them
Speaking of utes i want more pics of the build..... well any ones build 2 door or 4 door disco or fender i want the pics of where the tray meets the chassis.... where the body has been finished etc... all the really tech pics not just posing pics. I am going to use a kit but it dosnt come with a destruction manual so its going to be interesting at times. And to make things really interesting i am going to try and graft my sun roof in to the ute roof to keep it fit for the queen!!
TD5 96 Discovery UTE.
mickrangie
i have a look and see if i can find disk with the ute photos ,
mine is in members i keeped the tub,
we did cut one down that cloughy got to look at before he did his as a tray , when we did it we unpicked the spot welds were rear floor steps up and were going to finish it up about 4" short then cloughy made his tray
i also made another ute that was a tub aswell the one that was on ebat but burnt in fires,
pm me with email if i find disk ill burn one and send to u to have a look
cheers chris
i have a look and see if i can find disk with the ute photos ,
mine is in members i keeped the tub,
we did cut one down that cloughy got to look at before he did his as a tray , when we did it we unpicked the spot welds were rear floor steps up and were going to finish it up about 4" short then cloughy made his tray
i also made another ute that was a tub aswell the one that was on ebat but burnt in fires,
pm me with email if i find disk ill burn one and send to u to have a look
cheers chris
Your more than welcome to come for a bo peep, i drink Melbourne bitter by the way, more than happy to share a fewmickrangie wrote:Speaking of utes i want more pics of the build..... well any ones build 2 door or 4 door disco or fender i want the pics of where the tray meets the chassis.... where the body has been finished etc... all the really tech pics not just posing pics. I am going to use a kit but it dosnt come with a destruction manual so its going to be interesting at times. And to make things really interesting i am going to try and graft my sun roof in to the ute roof to keep it fit for the queen!!
Wanted: Car trailer or beaver tail truck, let me know what you got
Then you can send on the photo's to me.mickrangie wrote:Speaking of utes i want more pics of the build..... well any ones build 2 door or 4 door disco or fender i want the pics of where the tray meets the chassis.... where the body has been finished etc... all the really tech pics not just posing pics. I am going to use a kit but it dosnt come with a destruction manual so its going to be interesting at times. And to make things really interesting i am going to try and graft my sun roof in to the ute roof to keep it fit for the queen!!
Maybe when we get closer to build time we better make a trip down to Cloughy's
Thanks,
Adam
Adam
Hi Eyby and Shakes,
The Ritters auto conversions are interesting and Shakes has a point with the decipher. The conversions weren't all C4's - some were C6's and some were C9's. The one I bought with a RR for parts I thought was a C4 before the reco/bulletproof when I was told it was a C9. It now sits behind a 350 Chev, crawls in LR and is magic on the road. I have talked to Noel at Ritters a couple of times about these conversions (he was there when they were providing the first auto box option and maybe aircon for RR's on behalf of LR Aus, in the world). It's an interesting story that probably should be fleshed out in the sticky section.
cheers, DL
The Ritters auto conversions are interesting and Shakes has a point with the decipher. The conversions weren't all C4's - some were C6's and some were C9's. The one I bought with a RR for parts I thought was a C4 before the reco/bulletproof when I was told it was a C9. It now sits behind a 350 Chev, crawls in LR and is magic on the road. I have talked to Noel at Ritters a couple of times about these conversions (he was there when they were providing the first auto box option and maybe aircon for RR's on behalf of LR Aus, in the world). It's an interesting story that probably should be fleshed out in the sticky section.
cheers, DL
Who is online
Users browsing this forum: No registered users and 20 guests