Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

body lift, legal?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 19
Joined: Mon Oct 16, 2006 7:57 pm

body lift, legal?

Post by suzuki newby »

Just a simple question, is a body lift legal in qld. Im pretty much doing one anyway but just like to know.
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

yes and no...

you need to go and get an application for modification approval from queensland transport, fill out the form on what your doing and they will send you back an approval form, as body lifts are not modplatable there's no code for it.


Now wether Qld transport will pass it depends on what blocks are used, they need to be engineer tested and have a Qld transport approval No# printed on them, pretty sure that alloy body lift blocks arent approved but correct me if i'm wrong. ;)

Also I've been told that bodylifting a 4by with SRS Airbag It can't be done as it changes the airbag sensors sensitivity

can anybody clarify this ? any GV owners with BL and Airbags ?
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Posts: 310
Joined: Fri Oct 28, 2005 11:56 am

Post by dreamz »

also anything over 2 inchs is not legal, not like anyone cares though just dont run into DOT.
Pep
Posts: 189
Joined: Fri Jun 16, 2006 7:39 am
Location: Caboolture, Qld

Post by Pep »

Who in between Brisbane and the Sunny Coast can do a 2" lift
and wat's a good price to pay
No longer the BIG Man in a Little Car!!

Now in a GUII
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

see brett in @ on track 4wd centre 3290 2599

moss st Springwood ;)
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
User avatar
Nev
Posts: 621
Joined: Wed May 25, 2005 10:00 am
Location: Brisbane, Australia

Post by Nev »

well i've been through the do one anyway but got pulled over by QT and done for it among other things and wouldn't advise doing it with approval but hey...its ur money and license. Alloy blocks can be approved but i thought the process was send in for modification apporoval detailing what will be done and by who then QT must inspect it. This is the risky bit as it must go through the pits and they will check the whole vehicle. Places to get it done between brisbane and sunny...id suggest Lance at Suzisport Albion (QLD 4wd spares and repairs) or Mark at suziworx at eudlo if you can get hold of him. Reversible kit (only way to go) is usually around $300-350 and install will prob set you back $200-300?
01 GU Patrol 4.2TD Wagon
Post Reply

Who is online

Users browsing this forum: No registered users and 47 guests